Monte 2 Light Outdoor Flush Ceiling Light - Black

The Monte 2 Light Outdoor Flush Ceiling Light in black brings a little character to covered outdoor areas. It takes its cue from classic barware, with clear cut glass panes carrying an etched argyle pattern that catches and scatters the light. Two lamps sit behind the glass, framed in aluminium finished in black. Sitting close to the ceiling, it gives a tidy, low profile that suits spaces where a hanging fitting would feel too much.

This is an exterior light with an IP44 rating, so it copes well with a covered porch, a sheltered entrance, a car port or a garden room where it stays out of direct rain. The wider, brighter output from two lamps makes it a good choice for approach areas and doorways where you want to see clearly. It works equally well over a back door or in a summer house, and the black finish keeps things quiet against most walls and ceilings.

The frame is aluminium paired with clear cut glass, and it carries a three year anti corrosion guarantee to reassure you outdoors. It runs on mains voltage and is a Class I fitting, so it needs an earth connection. Two E27 lampholders take a maximum of 40W each; the lamps are not included, which lets you pick the look you prefer. Colour temperature depends on the bulb you choose, from a warmer glow to a cooler white, and the fitting works with dimmable lamps if you use a compatible dimmer. To care for it, switch off at the mains and let it cool, then wipe the glass and frame with a soft, dry cloth. Avoid harsh cleaners so the finish stays sound. Fit the light by a qualified electrician.

What is this light made from?

The frame is aluminium in a black finish, paired with clear cut glass panes that carry an etched argyle pattern. It also comes with a three year anti corrosion guarantee for outdoor use.

Can I use it outside?

Yes. It is made for exterior use with an IP44 rating, which suits covered and sheltered spots like porches, entrances and car ports where it stays out of direct rain.

Which bulbs does it take and are they included?

It takes two E27 bulbs up to 40W each. The bulbs are not included, so you can choose the look you want. Colour temperature depends on the bulbs you fit.

Is it dimmable?

The fitting works with dimmable lamps when used with a compatible dimmer switch. Choose dimmable E27 bulbs if you want to adjust the brightness.

How do I clean it?

Switch off at the mains and let the light cool, then wipe the glass and frame with a soft, dry cloth. Avoid harsh cleaners so the finish stays in good condition.

Does it need special wiring?

It runs on mains voltage and is a Class I fitting, so it needs an earth connection. We recommend a qualified electrician installs it.