Free Delivery on all orders over £99*

LYYT RGB LED Strip Extension Lead - 3m

£199
The RRP is the manufacturer's recommended retail price of the item.
10 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The LYYT 3m RGB LED strip extension lead connects sections of 10mm or 12mm RGB LED tape using 4-pin connectors that carry the blue, red, green and positive voltage lines. Rated at 2A maximum current, the lead allows RGB strips to be positioned up to 3 metres apart without additional power injection, or can be used to run cable from a controller to a strip mounted in a harder-to-reach location.

The extension lead suits installations where RGB tape needs to span across gaps in cabinetry, around corners where rigid tape cannot bend, or between separate runs on opposite walls. When used with the RGB amplifier (153.771UK, sold separately), multiple extension leads can be daisy-chained to support installations drawing more than 2A total, allowing longer continuous runs without voltage drop or colour shift along the tape.

The 4-pin connectors clip onto the copper pads on standard RGB LED strip without soldering, matching the B, R, G, V+ configuration used across most 12V RGB tape. The 13mm cable width and white PVC insulation keep the extension lead discreet when run inside ceiling voids, behind coving or within cabinet plinths. At 80g, the lead remains flexible enough to route through tight spaces without kinking or pulling connectors loose.

Specification
Current rating 2A max. per lead
Connectors 4-pin (B, R, G, V+)
Length 3m
Diameter 10
Frequently Asked

What RGB LED tape width does it support?

The 4-pin connectors fit both 10mm and 12mm wide RGB LED strip. The connector pin spacing matches the standard copper pad layout used on most 12V RGB tape sold for residential and retail installation.

Can multiple extension leads be joined together?

Yes, but the 2A current limit applies to the total load across all connected leads. For installations drawing more than 2A, use the LYYT RGB amplifier (153.771UK, sold separately) to inject additional power and prevent voltage drop along the run.

Does the lead require soldering?

No. The 4-pin connectors clip directly onto the copper pads on RGB LED strip without soldering. Ensure the strip pads are clean and the connector polarity matches the B, R, G, V+ markings on the tape before clipping.

Is the cable suitable for outdoor use?

The extension lead is designed for indoor installation. The white PVC insulation is not rated for UV exposure or direct weather contact. For outdoor RGB installations, use IP-rated connectors and cable designed for external environments.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The LYYT 3m RGB LED strip extension lead connects sections of 10mm or 12mm RGB LED tape using 4-pin connectors that carry the blue, red, green and positive voltage lines. Rated at 2A maximum current, the lead allows RGB strips to be positioned up to 3 metres apart without additional power injection, or can be used to run cable from a controller to a strip mounted in a harder-to-reach location.

    The extension lead suits installations where RGB tape needs to span across gaps in cabinetry, around corners where rigid tape cannot bend, or between separate runs on opposite walls. When used with the RGB amplifier (153.771UK, sold separately), multiple extension leads can be daisy-chained to support installations drawing more than 2A total, allowing longer continuous runs without voltage drop or colour shift along the tape.

    The 4-pin connectors clip onto the copper pads on standard RGB LED strip without soldering, matching the B, R, G, V+ configuration used across most 12V RGB tape. The 13mm cable width and white PVC insulation keep the extension lead discreet when run inside ceiling voids, behind coving or within cabinet plinths. At 80g, the lead remains flexible enough to route through tight spaces without kinking or pulling connectors loose.

    Specification
    Current rating 2A max. per lead
    Connectors 4-pin (B, R, G, V+)
    Length 3m
    Diameter 10
    Frequently Asked

    What RGB LED tape width does it support?

    The 4-pin connectors fit both 10mm and 12mm wide RGB LED strip. The connector pin spacing matches the standard copper pad layout used on most 12V RGB tape sold for residential and retail installation.

    Can multiple extension leads be joined together?

    Yes, but the 2A current limit applies to the total load across all connected leads. For installations drawing more than 2A, use the LYYT RGB amplifier (153.771UK, sold separately) to inject additional power and prevent voltage drop along the run.

    Does the lead require soldering?

    No. The 4-pin connectors clip directly onto the copper pads on RGB LED strip without soldering. Ensure the strip pads are clean and the connector polarity matches the B, R, G, V+ markings on the tape before clipping.

    Is the cable suitable for outdoor use?

    The extension lead is designed for indoor installation. The white PVC insulation is not rated for UV exposure or direct weather contact. For outdoor RGB installations, use IP-rated connectors and cable designed for external environments.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.