Free Delivery on all orders over £99*

LYYT 3-Pin LED Rope Light Power Cable - 1.5m

£699
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The LYYT 3-pin LED rope light power cable is a 1.5m mains connection cable for LYYT 3-pin LED rope light installations. The cable carries a UK 3-pin plug at one end and a 3-pin connector at the other, with heat-shrink sleeving and a connector pin supplied to create a sealed joint between the cable and the rope light run.

Rated to power up to 100m of continuous LED rope light on a single circuit, the cable suits both residential and commercial installations where the rope light is being run along garden boundaries, under eaves, around signage, or along architectural features that need static continuous lighting. The 1.5m lead length gives flexibility in positioning the mains connection point relative to the start of the rope light run.

The cable is designed for static (non-animated) light output only. The heat-shrink sleeving provided creates a water-resistant seal once applied with a heat gun, making the connection suitable for outdoor and damp-location installations when paired with IP-rated LYYT rope light. The pin connector slots directly into the 3-pin rope light profile and is secured by the heat-shrink once fitted.

Specification
Dimensions 1500 x 50 x 50mm
Weight 116g
Max. length 100m LED rope light
Frequently Asked

Is this compatible with all LED rope lights?

No. This cable is designed specifically for LYYT 3-pin LED rope light. It will not connect to 2-pin rope light or other manufacturers' rope light systems without the correct pin configuration.

How is the heat-shrink sleeving applied?

The heat-shrink sleeving slides over the joint between the cable's pin connector and the rope light profile. Apply heat from a heat gun (not a lighter or open flame) evenly around the sleeving until it contracts and seals the connection. Allow to cool before handling.

Can this be used outdoors?

Yes, when the heat-shrink sleeving is correctly applied to seal the connection, and when used with IP-rated LYYT rope light. The mains plug should be connected via an RCD-protected outdoor socket or weatherproof enclosure rated for outdoor use.

What does the 100m maximum rating mean?

The cable and connector are rated to safely carry the electrical load for up to 100m of LYYT LED rope light on a single circuit. Runs longer than 100m require additional power injection points to avoid voltage drop and dimming at the far end of the run.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The LYYT 3-pin LED rope light power cable is a 1.5m mains connection cable for LYYT 3-pin LED rope light installations. The cable carries a UK 3-pin plug at one end and a 3-pin connector at the other, with heat-shrink sleeving and a connector pin supplied to create a sealed joint between the cable and the rope light run.

    Rated to power up to 100m of continuous LED rope light on a single circuit, the cable suits both residential and commercial installations where the rope light is being run along garden boundaries, under eaves, around signage, or along architectural features that need static continuous lighting. The 1.5m lead length gives flexibility in positioning the mains connection point relative to the start of the rope light run.

    The cable is designed for static (non-animated) light output only. The heat-shrink sleeving provided creates a water-resistant seal once applied with a heat gun, making the connection suitable for outdoor and damp-location installations when paired with IP-rated LYYT rope light. The pin connector slots directly into the 3-pin rope light profile and is secured by the heat-shrink once fitted.

    Specification
    Dimensions 1500 x 50 x 50mm
    Weight 116g
    Max. length 100m LED rope light
    Frequently Asked

    Is this compatible with all LED rope lights?

    No. This cable is designed specifically for LYYT 3-pin LED rope light. It will not connect to 2-pin rope light or other manufacturers' rope light systems without the correct pin configuration.

    How is the heat-shrink sleeving applied?

    The heat-shrink sleeving slides over the joint between the cable's pin connector and the rope light profile. Apply heat from a heat gun (not a lighter or open flame) evenly around the sleeving until it contracts and seals the connection. Allow to cool before handling.

    Can this be used outdoors?

    Yes, when the heat-shrink sleeving is correctly applied to seal the connection, and when used with IP-rated LYYT rope light. The mains plug should be connected via an RCD-protected outdoor socket or weatherproof enclosure rated for outdoor use.

    What does the 100m maximum rating mean?

    The cable and connector are rated to safely carry the electrical load for up to 100m of LYYT LED rope light on a single circuit. Runs longer than 100m require additional power injection points to avoid voltage drop and dimming at the far end of the run.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.