Description
Small, shallow and neatly finished, this is a flush fitting for rooms where headroom is short. A wine shaped shade in opal sits beneath a round polished chrome plate, so the light comes out diffused and gentle rather than sharp. The chrome picks up whatever daylight the room has and keeps the fitting looking crisp against a white ceiling. At 15cm across it takes up very little of the ceiling, and the profile is low enough to pass almost unnoticed until it is lit.
We use fittings like this on landings, in hall ceilings, in a box bedroom or a cloakroom, and anywhere a pendant would hang into the way. It runs on a single E27 lamp of up to 20W, and we would choose a warm white LED in a golf or globe shape so the opal glows evenly from edge to edge. Dimming is possible with a compatible lamp and a suitable dimmer, though the dimmer itself is a separate purchase. Keep it to dry rooms; steamy bathrooms and covered porches are outside what it is meant for.
The plate and trim are finished in polished chrome, bright rather than brushed, and the shade is opal. Wipe the chrome with a dry soft cloth to keep water marks off it, and give the shade the same treatment once the lamp has gone cold, using nothing wet and nothing abrasive. It carries a one year warranty. We stock the same fitting with an amber wine shade if you want a warmer cast, and the wine shade is offered on an antique gold plate too, which is worth a look if the rest of the room leans towards brass. Lamps are not included.
Specification
| Colour |
Polished Chrome |
| Second Colour |
Opal |
| Weight |
0.91KG |
| Diameter |
150mm |
| Height |
90mm |
| Materials Used |
Iron, Steel,Glass |
| Adjustable Height |
No |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~ 50/60Hz |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Shade Colour |
Opal |
| Plate Dimensions (mm) |
D:150mm x T:1.0mm |
| Shade Material |
Glass |
| Shade Included |
Yes |
| Number of Shades |
1 |
| Pieces Included |
1 |
| Unassembled |
Yes-Shade To Be Attached |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How far does it sit below the ceiling?
It measures 90mm in height, with a diameter of 150mm, so it stays tight overhead in rooms with limited headroom.
Which lamp does it take?
One E27 lamp rated up to 20W. An LED is the sensible choice behind an opal shade. Lamps are not supplied.
Can I put it on a dimmer?
Yes, provided you fit a dimmable lamp and a dimmer matched to it. No dimmer is included with the fitting.
Is it suitable for a bathroom?
No. It is rated IP20, which makes it an interior fitting for dry rooms only.
How should I clean the chrome and the shade?
Switch off at the wall and let the lamp cool, then use a dry soft cloth on both. Avoid sprays, creams and anything abrasive, as these will dull polished chrome.
What else is in the Lori range?
The same 15cm flush fitting comes with amber and chrome trapezium shades, round globe shades and dimple shades, on polished chrome or antique gold.