Description
Cast concrete in a plain white finish, this is a compact rectangular block that sits tight to the wall and takes two GU10 lamps. At 180mm tall it stays modest, reading as a quiet marker beside a door rather than something you look at first. The surface is matt, with the faint grain of the material still visible, so it sits well against brick, render and timber cladding alike. It is rated for outdoor use, and dimmable lamps on a compatible dimmer will bring the level down after dark.
This is the fitting we reach for on porches, garage walls, side passages and small courtyards, where a lantern would be too fussy and too large. It suits a modern house or a recently landscaped garden, and looks right on clean render or sawn stone. Lamps up to 12W each are ample for a doorway. A narrow reflector gives tight pools of light on the ground, while a wider one washes the wall itself, and we keep both in stock so the beam can be changed later without changing the fitting.
Concrete makes for a solid, honest body with real weight to it, and the white finish is part of the material rather than a coat laid over the top. Keep it clean by brushing off cobwebs and garden dust, then wiping with a cloth and a little clean water; leave abrasive pastes and solvent cleaners well alone, as they will scuff the surface. It carries a two year warranty. Within the range we also stock a round version, both shapes in grey concrete, and smaller spotlights for planting and low level light. Lamps are not included.
Specification
| Colour |
White Concrete |
| Wall Mountable |
Yes |
| Weight |
2.20KG |
| Width |
86mm |
| Height |
180mm |
| Projection |
100mm |
| Materials Used |
Concrete |
| Energy Class |
A++ to B |
| Max Energy Class |
A++ |
| Min Energy Class |
B |
| Lamp |
2 x GU10 12W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Up & Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
100-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP65 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size lamps does it take?
Two GU10 lamps, each up to 12W. A 50mm LED reflector lamp is the recommended choice.
Can it be dimmed?
Yes, provided you fit dimmable GU10 lamps and pair them with a suitable dimmer. No dimmer is supplied with the light.
How far does it stand off the wall?
Projection is 100mm, with a width of 86mm and a height of 180mm, so it keeps close to the surface in a narrow passage.
Is it suitable for an exposed wall?
It has an IP65 rating, so driving rain and hose spray are not a problem. It is a Class 1 fitting and requires an earth connection.
How do I clean the concrete?
Brush away dust and cobwebs, then wipe with a damp cloth and clean water only. Avoid scouring creams and solvents, which will mark the matt surface.
What is the weight?
2.2kg.