Description
Cast concrete gives this small spotlight its weight and its faintly rough grey surface, with the tone shifting a little from piece to piece as cast stone tends to. The body sits 90mm across and stands 130mm tall, so it reads as a neat block rather than something that pulls the eye. A GU10 lamp of up to 12W goes behind the front aperture, and the housing is sealed against dust and driving rain, which puts fully exposed positions within reach. Dimming works where the lamp itself is a dimmable type and a dimmer is on the circuit.
We would set them flanking a front door, or in a run along a garden wall so the light grazes brick and planting. It suits a covered porch, a side passage, the head of garden steps, or a spot above a shed door where you want to see the lock. Indoors it holds up in a shower room, a utility or a boot room, anywhere splash and steam rule out a softer fitting. It is one for houses with plain rendered or brick faces, where a concrete block looks intended rather than dropped on.
Concrete makes up the outside in full, so expect a surface that weathers gently in the open air rather than staying showroom fresh; many people like it more for that. Grit and cobwebs brush off dry, and salt or splash marks lift with a cloth wrung out in clean water, no abrasives and no solvents. It carries a two year warranty. We stock the same rectangular shape in white concrete, a round spotlight, and wall lights in either concrete if you want one look carried across a whole elevation. Lamps are not included.
Specification
| Colour |
Grey Concrete |
| Ceiling Mountable |
Yes |
| Weight |
1.20KG |
| Length |
90mm |
| Width |
90mm |
| Height |
130mm |
| Materials Used |
Concrete |
| Adjustable Height |
No |
| Hanging Method |
Bracket |
| Energy Class |
A++ to B |
| Max Energy Class |
A++ |
| Min Energy Class |
B |
| Lamp |
1 x GU10 12W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Light Distribution |
Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
100-240V~50/60Hz |
| Dimmable |
Yes - Dimmable Lamps Required |
| Dimmer Included |
No |
| IP Rating |
IP65 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp does it take?
One GU10 lamp rated up to 12W. An LED with a 50mm reflector is the recommended choice, and it must be a dimmable lamp if you intend to dim the circuit. Lamps are supplied separately.
Is it suitable for a fully exposed wall or soffit?
Yes. It is rated IP65, meaning dust tight and protected against water jets, so rain and wind driven spray are not a problem.
What are the dimensions?
The face measures 90mm by 90mm and the fitting stands 130mm tall. It weighs 1.2kg.
Will every piece look identical?
Not quite. Concrete is cast, so small variations in tone, speckle and texture are normal and are part of the material rather than a fault.
How should I clean it?
Brush away grit and cobwebs while dry, then wipe with a cloth wrung out in clean water. Avoid abrasive pads, bleach and solvent cleaners, which can mark the surface.
How long is the warranty?
It carries a two year warranty.