Description
Rust brown gives this compact outdoor wall light a weathered, earthy tone that sits quietly against brick, render or timber cladding. The square body measures 70mm across the face and stands off the wall by 95mm, so it reads as a neat block instead of a lantern. It takes a GU10 reflector lamp of up to 10W, and it is not dimmable, so output stays constant whenever the circuit is live.
We would fit this beside a back door, along a side passage, or in a pair either side of a porch, where light is wanted at head height without a bulky fitting crowding the wall. It is sealed against rain and windblown dust, so an exposed elevation suits it as well as a sheltered one. There is no switch on the body, which keeps the shape clean and leaves control to the indoor switch you already use. The small footprint earns its place in flats, terraces and courtyards where the wall beside a door is short of room.
The rust brown finish is matt and low key, the sort of colour that ages into a wall rather than fighting it, and it hides rain marks better than a gloss would. Give the body a wipe with a damp cloth while the lamp is cold, dry it off afterwards, and after a windy spell check that grit and leaves have not gathered on the top edge. It carries a two year warranty. We stock this square shape in anthracite, sand white and sand black as well, with round versions across the same finishes for doors and gateposts where a softer outline works better. Lamps are not included.
Specification
| Colour |
Rust Brown |
| Wall Mountable |
Yes |
| Weight |
0.35KG |
| Width |
70mm |
| Height |
80mm |
| Projection |
95mm |
| Materials Used |
Die-cast Aluminium, Glass |
| Energy Class |
A++ to E |
| Max Energy Class |
A++ |
| Min Energy Class |
E |
| Lamp |
1 x GU10 10W max (lamps not included) |
| Lamp Cap |
GU10 |
| Recommended Lamp |
LED (50mm Reflector) |
| Max Low Energy Lamp (W) |
10W |
| CRI |
=80 |
| Light Distribution |
Down |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Warranty |
2yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
Which lamp should I use?
One GU10 lamp, up to a maximum of 10W. A 50mm LED reflector is the type we would reach for here. No lamp is supplied with the fitting.
Can I put it on a dimmer?
No. This one is non-dimmable, so it should be run from a standard on/off switch.
How much space does it need on the wall?
It is 70mm wide and 80mm tall, and it projects 95mm from the wall face, so it clears a door architrave easily. It weighs 0.35kg.
Is it rated for use outside?
Yes. It carries an IP54 rating, which covers dust and splashing water from any direction, making it suitable for porches, passages and open garden walls.
Does the fitting have its own switch?
It does not. The fitting is unswitched and works from your existing lighting circuit.
How long is the warranty?
Two years, from the manufacturer.