Free Delivery on all orders over £99*

IP65 LED Strip to Strip Connector 12V/24V - Single Colour 10mm

£299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This IP65 LED strip to strip connector joins two sections of 12V or 24V single colour 10mm LED flex in a straight line, maintaining electrical continuity without soldering. The polycarbonate housing carries an IP65 rating, protecting the connection against water jets and dust ingress in kitchens, bathrooms, and partially sheltered outdoor installations.

The connector uses a click-fit mechanism that grips both strip ends inside the housing via spring-loaded brass contacts. Strip the adhesive backing from the last 10-15mm of each LED flex end, insert each strip into the corresponding slot on the connector, and press until the click confirms contact. No tools are required for installation. For additional waterproofing in IP65-rated runs, silicone sealant (sold separately) can be applied along the entry points where the flex enters the connector housing.

Designed for use with Knightsbridge LFC24IPxx single colour LED flex series, the connector measures 26mm in length, 15mm in width and projects 7mm from the mounting surface once installed. The black polycarbonate finish blends into most LED flex backing tapes and mounting channels, reducing visibility in final installations.

Specification
Length 26 mm
Width 15 mm
Projection 7 mm
Construction Polycarbonate
Finish Black
Class III
IP Rating IP65
Primary Voltage 12/24V
Warranty 1
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What LED flex is this compatible with?

The connector is designed for Knightsbridge LFC24IPxx series single colour 10mm LED flex running on 12V or 24V. It will not fit RGB or RGBW strips, which require four-pin connectors.

Does it maintain the IP65 rating?

Yes, when correctly installed. For full IP65 protection in wet environments, apply silicone sealant along the entry points where the LED flex enters the connector housing.

Can this be used outdoors?

The IP65 rating protects against water jets and dust, making it suitable for partially sheltered outdoor areas such as covered patios or soffit lighting. It is not rated for full submersion or constant exposure to heavy rain.

Is soldering required?

No. The click-fit mechanism uses spring-loaded brass contacts to grip the copper pads on the LED flex. Strip the backing, insert the flex ends, and press until the connector clicks shut.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This IP65 LED strip to strip connector joins two sections of 12V or 24V single colour 10mm LED flex in a straight line, maintaining electrical continuity without soldering. The polycarbonate housing carries an IP65 rating, protecting the connection against water jets and dust ingress in kitchens, bathrooms, and partially sheltered outdoor installations.

    The connector uses a click-fit mechanism that grips both strip ends inside the housing via spring-loaded brass contacts. Strip the adhesive backing from the last 10-15mm of each LED flex end, insert each strip into the corresponding slot on the connector, and press until the click confirms contact. No tools are required for installation. For additional waterproofing in IP65-rated runs, silicone sealant (sold separately) can be applied along the entry points where the flex enters the connector housing.

    Designed for use with Knightsbridge LFC24IPxx single colour LED flex series, the connector measures 26mm in length, 15mm in width and projects 7mm from the mounting surface once installed. The black polycarbonate finish blends into most LED flex backing tapes and mounting channels, reducing visibility in final installations.

    Specification
    Length 26 mm
    Width 15 mm
    Projection 7 mm
    Construction Polycarbonate
    Finish Black
    Class III
    IP Rating IP65
    Primary Voltage 12/24V
    Warranty 1
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What LED flex is this compatible with?

    The connector is designed for Knightsbridge LFC24IPxx series single colour 10mm LED flex running on 12V or 24V. It will not fit RGB or RGBW strips, which require four-pin connectors.

    Does it maintain the IP65 rating?

    Yes, when correctly installed. For full IP65 protection in wet environments, apply silicone sealant along the entry points where the LED flex enters the connector housing.

    Can this be used outdoors?

    The IP65 rating protects against water jets and dust, making it suitable for partially sheltered outdoor areas such as covered patios or soffit lighting. It is not rated for full submersion or constant exposure to heavy rain.

    Is soldering required?

    No. The click-fit mechanism uses spring-loaded brass contacts to grip the copper pads on the LED flex. Strip the backing, insert the flex ends, and press until the connector clicks shut.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.