Ibis 3 Light Crystal Flush Ceiling Light - Polished Chrome With White Feather Shade

The Ibis is a 350mm flush ceiling light combining a white feather shade with crystal droplets and a polished chrome ceiling plate. Three E14 bulbs (sold separately) sit inside the feather shade, with strands of faceted crystal spheres hanging from the chrome base beneath the shade. The feathers create a soft, diffused light effect while the crystal catches and reflects light in multiple directions.

Designed for bedrooms, dressing rooms and boutique retail spaces where ceiling height is limited but decorative impact is wanted. The 410mm total drop from ceiling to crystal base suits rooms with 2.4m ceilings and above. The flush mount sits directly against the ceiling without a drop rod, making it suitable for low-ceiling spaces where a pendant would hang too low. The feather shade provides most of the light diffusion, while the crystal acts as accent detail rather than primary lighting.

The white feather shade is built on a wire frame with individual feathers layered to create the cloud-like volume. The polished chrome base plate is 350mm in diameter and the crystal strands hang approximately 60-80mm below the feather shade depending on the drape. The fitting weighs 4.14kg once assembled, requiring a secure ceiling fixing into a joist or ceiling anchor rated for this weight. Each of the three E14 bulbs can run up to 60W, though LED equivalents of 6-8W per bulb provide adequate light for most bedroom applications.

What bulbs does the Ibis take?

The fitting uses three E14 small Edison screw bulbs, each up to 60W. Bulbs are sold separately. Most users choose warm white LED candle bulbs of 6-8W and 2700K-3000K for bedroom lighting.

Is the Ibis dimmable?

Yes, when fitted with dimmable E14 bulbs. The fitting itself does not have dimming electronics, so dimmer compatibility depends on the specific bulbs and dimmer switch used together.

How is the feather shade cleaned?

The feather shade collects dust over time. Use a soft brush or a hairdryer on a cool, low setting to blow dust away from the feathers. Avoid water or cleaning sprays, as feathers are fragile and can lose their structure when wet.

What ceiling fixing is needed for the 4.14kg weight?

The ceiling plate must be fixed into a ceiling joist or use a plasterboard anchor rated for at least 5kg. Standard plasterboard fixings are not adequate for this weight. If in doubt, consult a qualified electrician during installation.