Description
This is an ex-display Tree 8-light branching chandelier in matt black, sold as seen. Eight smoked glass globes sit at varied heights along an asymmetric matt black branch frame, each housing an E27 lamp holder (bulbs sold separately). The fitting drops from a single round ceiling plate via a short rigid stem, with the arms spreading horizontally to a 180cm overall diameter and a 46cm vertical height.
The scale and horizontal spread make this a fitting for large dining tables, kitchen islands of 2m or more, open-plan living areas, and high-ceilinged entrance halls. The branching layout means the globes light a wide footprint rather than a single concentrated point, which suits long tables better than a centred pendant cluster. With eight E27 holders the fitting can accept GLS filament bulbs for a warm decorative glow, or matching LED filament lamps for lower energy use.
The smoked grey glass dims the visible filament to a softer ember rather than a bright point source, reducing glare across the spread of the fitting. The matt black metalwork has a low-sheen finish that reads as architectural rather than glossy, pairing with industrial, modern and contrast-led interiors. As an ex-display piece, the fitting may show minor signs of handling or display use; it is offered at a reduced price on that basis and is sold without the option of return for cosmetic marks consistent with display.
Specification
| Height |
46cm |
| Diameter |
180cm |
| Wattage |
8 x E27 |
| Material |
Metal/Glass |
| Warranty |
2 Year |
Frequently Asked
What does ex-display mean for this fitting?
The piece has been used as a showroom display rather than kept in sealed retail packaging. It is fully functional and supplied with the standard 2-year warranty, but may show light handling marks consistent with display use, which is reflected in the reduced price.
What bulbs does it take?
Eight E27 (Edison screw) bulbs are required, sold separately. GLS filament bulbs suit the smoked glass globes well; LED filament equivalents in 2700K-3000K give a similar warm look with lower running cost. Total load should be matched to a standard domestic ceiling circuit.
What size room does it suit?
At 180cm across, the fitting needs a room with enough horizontal clearance for the spread of the arms - typically a dining or living space of 4m x 4m or larger. Ceiling height should be 2.5m or more to keep the globes clear of head height over a table.
Can the arms be repositioned?
The branching arms on this style of fitting are typically articulated at the joints during installation, allowing the angle of each arm to be adjusted within the frame. Final positioning is set on fitting and should be carried out by a qualified electrician.