Description
The Elin wall light brings a warm, contemporary look to a single-fitting design. A trumpet-shaped clear glass shade sits at its heart, drawing the eye to the light source within and softening the glow across the wall. Finished in lacquered brass, it pairs a familiar form with a modern touch, making it a versatile choice where you want a fixture that feels current without shouting for attention. The integrated LED gives a warm 3000K light with a bright output, and the fitting is fully dimmable so you can set the mood to suit the moment.
With an IP44 rating, this is a wall light built to cope with the damp and humidity of a bathroom, so it works well above a vanity, beside a mirror or along a wall where splashes are likely. That same rating suits it to other rooms too, from a hallway to a bedroom or living space, wherever you want a clean band of light. Its wide, shallow proportions sit close to the wall, so it stays out of the way in tighter spots while still spreading light generously.
The body is made from solid brass in a lacquered finish, which helps keep the surface looking consistent over time. The light source is an integrated LED, so there is no separate bulb to buy or fit, and no lamp to replace; the warm white colour temperature is fixed at 3000K. It is a Class I fitting running on mains voltage and should be installed by a qualified electrician. To care for it, switch off the power, then wipe the brass and glass with a soft, dry or slightly damp cloth. Avoid abrasive cleaners and harsh chemicals, which can mark the lacquer. It comes with a two year guarantee.
Specification
| Height |
127mm |
| Width |
584mm |
| Diameter |
584mm |
| Projection/Depth |
127mm |
| Number of Lamps |
1 |
| Maximum Wattage |
22W |
| Socket |
Integrated LED |
| Integrated LED |
Yes |
| IP Rating |
IP44 |
| Class |
Class I |
| Voltage |
220-240v 50hz |
| Finish |
Lacquered Brass |
| Materials |
Brass |
| Suitable Location |
Bathroom |
| Weight |
1.62kg |
| Warranty |
2 Year |
Frequently Asked
What is the Elin wall light made from?
The body is solid brass with a lacquered finish, paired with a clear glass shade. The lacquer helps keep the brass looking even over time.
How do I clean and care for it?
Switch off the power first, then wipe the brass and glass with a soft, dry or slightly damp cloth. Avoid abrasive cleaners and harsh chemicals, as these can damage the lacquered surface.
Does it need a bulb?
No. The light source is an integrated LED, so there is no separate bulb to buy, fit or replace. The colour temperature is fixed at a warm white 3000K.
Can I use it in a bathroom?
Yes. It carries an IP44 rating, so it is suitable for bathroom use, including above a vanity or beside a mirror where splashes and humidity are common.
Is the light dimmable?
Yes, the fitting is dimmable when used with a compatible dimmer switch, so you can adjust the brightness to suit the room.
Who should install it?
It runs on mains voltage and is a Class I fitting, so it should be wired in by a qualified electrician.