Description
A slim arm sweeps out and down from the ceiling, ending in an E27 lampholder that sits forward rather than straight below. It comes as a frame only, so the shade is yours to choose, and the fitting reads differently depending on what you hang from it: a wide drum for a soft spread, or a narrow cone for something tighter. The satin black finish has a low sheen, closer to soft graphite than gloss, and the body measures 10cm across. The drop adjusts over a generous span, so the height can be set to suit the room.
We reach for this one over a kitchen island or a length of worktop, where the curve brings the light slightly forward of the ceiling point. It works at a bedside too, keeping the table below clear, and in a hallway where a straight drop would look plain. Because the shade is separate, it suits anyone matching a frame to shades they already own, or ordering fabric in a particular colour. It takes lamps up to 20W, and it will dim with a compatible lamp and dimmer, neither of which comes with it.
The frame is finished in satin black along the arm and around the holder, and it will carry a shade of up to 5kg, which covers most fabric and glass choices. Run a dry duster along the curve now and then; if fingermarks gather near the lampholder, a barely damp cloth followed by a dry buff will lift them, with the power off beforehand. It carries a one year warranty. We stock the curved frame in linear and round versions in the same satin black, and the small Dreifa ceiling light comes in a spread of finishes, from matt white to antique copper, if you want the same look held tight to the ceiling. Lamps are not included.
Specification
| Colour |
Satin Black |
| Weight |
0.80KG |
| Diameter |
100mm |
| Minimum Drop (mm) |
240mm |
| Maximum Drop (mm) |
1620mm |
| Body Height (mm) |
90mm |
| Materials Used |
Iron |
| Adjustable Height |
Yes |
| Hanging Method |
Chain |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
A |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED Lamp Dependant On Shade |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240~50/60HZ |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Base Dimensions (mm) |
D100 X H25mm |
| Cup Dimensions (mm) |
D70 X H15mm |
| Bracket Dimensions (mm) |
L90 X W20 X H5mm |
| Cable Information |
2X 0.75mm² Black PVC round cable L=1650mm |
| Cable Colour |
Black |
| Shade Included |
No |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Sloped Ceiling Compatible |
Yes |
| Sloped Ceiling Adapter Required |
No |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How far does it hang down?
The drop is adjustable from 240mm at its shortest to 1620mm at its longest, so it can sit low over a table or high in a hallway.
Does it come with a shade?
No. It is supplied as a frame only, with an E27 lampholder ready for the shade of your choosing.
What size shade will it take?
Any shade made for an E27 holder, up to a maximum load of 5kg. The frame itself is 100mm in diameter with a body height of 90mm, so it stays discreet under most shades.
Can it be dimmed?
Yes, provided you fit a dimmable lamp and a matching dimmer switch. No dimmer is supplied with the pendant.
Which lamp should I use?
An LED lamp with an E27 cap, up to 20W. The best choice depends on the shade you pair it with, so a clear lamp suits an open shade and a pearl or opal lamp suits a wider drum.
Is it suitable for a bathroom?
No. It is rated IP20 and belongs in dry rooms such as kitchens, bedrooms, hallways and dining areas.