Description
A toggle switch sits on the body, so this one can be worked at the fitting itself rather than from the room's main switch. The metalwork is finished in matt black with a small cylindrical body of about 10cm, and it stands out from the wall far enough to give a lamp room to breathe. It takes one E27 lamp, and it will dim if you pair a dimmable lamp with a compatible dimmer. We would choose a warm white LED globe here, which keeps the running cost low and looks settled against the dark finish.
The switch is what makes it useful in a bedroom: set either side of a bed, they give each person their own reading light without losing table space to a lamp. It works just as well in a small study, over a chair in a reading corner, or in a spare room where guests want a light they can find in the dark. Because it is compact, it suits narrow spots such as the wall beside a landing window or the run above a hallway table.
Keep the finish clean by flicking dust off with a dry cloth while the light is off and cold; matt black holds fingermarks less readily than a polished finish, though a barely damp cloth will lift any that appear. Nothing here is meant for damp air, so keep it to dry rooms and away from a shower or a hob. It carries a one year warranty. The same small form is offered as a ceiling light in matt black and in other finishes from antique brass to polished chrome, and the range runs on into curved pendant frames if you want the look repeated over a table. Lamps are not included.
Specification
| Colour |
Matt Black |
| Weight |
1.10KG |
| Width |
100mm |
| Height |
170mm |
| Projection |
190/265mm |
| Materials Used |
Iron |
| Energy Class |
A++ to A |
| Max Energy Class |
A++ |
| Min Energy Class |
D |
| Lamp |
1 x E27 20W max (lamps not included) |
| Lamp Cap |
E27 |
| Recommended Lamp |
LED (ALL) |
| Light Distribution |
Ambient |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
Dependent On Lamps Used (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Yes - Toggle Switch |
| Dimmable |
Yes - Suitable Lamps & Dimmer Required |
| Dimmer Included |
No |
| IP Rating |
IP20 |
| Warranty |
1yr |
| UKCA/CE |
Yes |
| Plate Dimensions (mm) |
D:100mm x H:25mm |
| Bracket Dimensions (mm) |
L:90mm x W:20mm x H: 5mm |
| Shade Included |
No |
| Base Material |
Iron |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Use white gloves provided when handling crystal and glass. (3) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What lamp does it take?
One E27 lamp of up to 20W. Any LED type is suitable, and lamps are supplied separately so you can pick the shape and warmth you want.
Can it be dimmed?
Yes, provided you fit a dimmable lamp and use a compatible dimmer. No dimmer is supplied with the light.
Is there a switch on the fitting itself?
Yes, a toggle switch on the body, so the light can be turned on and off where you are standing.
What size is it?
The body measures 100mm wide and 170mm high, which keeps it neat on a narrow stretch of wall.
Can it go in a bathroom?
No. It is rated IP20, so it is intended for dry indoor rooms rather than bathrooms or anywhere exposed to steam or splashing.
How should the matt black finish be cleaned?
Switch off and let the lamp go cold, then dust with a dry soft cloth. For marks, a barely damp cloth is enough; avoid abrasives and solvent cleaners.