Free Delivery on all orders over £99*

CyroLED Fire-Rated Anti-Glare CCT LED Downlight - White (No Bezel)

£1299
The RRP is the manufacturer's recommended retail price of the item.
510 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge CyroLED is an 86mm fire-rated anti-glare LED downlight with adjustable colour temperature and wattage settings built into the fitting. The recessed LED source sits behind a deep-set aperture that minimises direct view of the diode, reducing glare in kitchens, living rooms and bathrooms where the ceiling is in the normal sightline. The fitting is supplied without a bezel, allowing you to pair it with separate Knightsbridge bezel finishes (sold separately) in white, chrome, brass or black.

The downlight offers four CCT settings via a rear-mounted switch: 3000K, 4000K, 5000K and 6500K, ranging from warm white through neutral to cool daylight. A second switch toggles between 4W and 6W output, giving eight distinct lighting modes from a single fitting. The IP65 rating from below allows installation in bathroom zones 1 and 2 (subject to circuit protection) and the fire rating meets UK Building Regulations for retrofit ceiling penetrations. The 53mm recessed depth fits most ceiling voids and the loop-in/loop-out terminal block speeds installation in multi-downlight circuits.

The pressed steel housing carries Class II double-insulated construction, meaning it does not require an earth connection and is suitable for older wiring systems. The 45-degree beam angle provides focused downlighting rather than wide ambient wash, making it effective for task lighting over worktops, sinks and vanity units. The fitting is dimmable on trailing-edge dimmers; check compatibility with your dimmer model before installation as some older leading-edge dimmers may cause flicker.

Specification
Height 58mm
Diameter 86mm
Projection 5°
Recessed Depth 53mm
Construction Pressed steel
Class II
IP Rating IP65 (IP20 from above)
Primary Voltage 230V 50Hz
Wattage 4/2W
Lamp Included Yes
Beam Angle 45
Beam Angle 45°
Light Colour CCT
Lumens 350/395/405/395/480/580/585/545lm
Downloads

Product Specification Sheet

Frequently Asked

How do I change the colour temperature and wattage?

Two DIP switches on the rear of the fitting allow you to select one of four CCT settings (3000K, 4000K, 5000K, 6500K) and toggle between 4W and 6W output. Settings are adjusted before installation or by removing the fitting from the ceiling.

Does this come with a bezel?

No. The CyroLED Anti-Glare is sold as a bezel-less fitting, allowing you to choose from Knightsbridge's range of separate bezels in white, polished chrome, brushed chrome, antique brass, matt black or satin nickel to match your interior.

Can it be used in bathrooms?

Yes. The IP65 rating from below allows installation in bathroom zones 1 and 2 (within 2.25m of a bath or shower enclosure), subject to the circuit being RCD-protected. The IP20 rating from above means the ceiling void does not need additional moisture protection.

What ceiling void depth is needed?

The fitting requires a minimum 53mm recessed depth above the ceiling surface, plus clearance for the connector block and cable. Most plasterboard ceilings on timber joists provide adequate depth; suspended ceilings may need a deeper void depending on the grid system.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Light source

Integrated LED

Energy-efficient integrated LED, ready to install with no bulbs to buy.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge CyroLED is an 86mm fire-rated anti-glare LED downlight with adjustable colour temperature and wattage settings built into the fitting. The recessed LED source sits behind a deep-set aperture that minimises direct view of the diode, reducing glare in kitchens, living rooms and bathrooms where the ceiling is in the normal sightline. The fitting is supplied without a bezel, allowing you to pair it with separate Knightsbridge bezel finishes (sold separately) in white, chrome, brass or black.

    The downlight offers four CCT settings via a rear-mounted switch: 3000K, 4000K, 5000K and 6500K, ranging from warm white through neutral to cool daylight. A second switch toggles between 4W and 6W output, giving eight distinct lighting modes from a single fitting. The IP65 rating from below allows installation in bathroom zones 1 and 2 (subject to circuit protection) and the fire rating meets UK Building Regulations for retrofit ceiling penetrations. The 53mm recessed depth fits most ceiling voids and the loop-in/loop-out terminal block speeds installation in multi-downlight circuits.

    The pressed steel housing carries Class II double-insulated construction, meaning it does not require an earth connection and is suitable for older wiring systems. The 45-degree beam angle provides focused downlighting rather than wide ambient wash, making it effective for task lighting over worktops, sinks and vanity units. The fitting is dimmable on trailing-edge dimmers; check compatibility with your dimmer model before installation as some older leading-edge dimmers may cause flicker.

    Specification
    Height 58mm
    Diameter 86mm
    Projection 5°
    Recessed Depth 53mm
    Construction Pressed steel
    Class II
    IP Rating IP65 (IP20 from above)
    Primary Voltage 230V 50Hz
    Wattage 4/2W
    Lamp Included Yes
    Beam Angle 45
    Beam Angle 45°
    Light Colour CCT
    Lumens 350/395/405/395/480/580/585/545lm
    Downloads

    Product Specification Sheet

    Frequently Asked

    How do I change the colour temperature and wattage?

    Two DIP switches on the rear of the fitting allow you to select one of four CCT settings (3000K, 4000K, 5000K, 6500K) and toggle between 4W and 6W output. Settings are adjusted before installation or by removing the fitting from the ceiling.

    Does this come with a bezel?

    No. The CyroLED Anti-Glare is sold as a bezel-less fitting, allowing you to choose from Knightsbridge's range of separate bezels in white, polished chrome, brushed chrome, antique brass, matt black or satin nickel to match your interior.

    Can it be used in bathrooms?

    Yes. The IP65 rating from below allows installation in bathroom zones 1 and 2 (within 2.25m of a bath or shower enclosure), subject to the circuit being RCD-protected. The IP20 rating from above means the ceiling void does not need additional moisture protection.

    What ceiling void depth is needed?

    The fitting requires a minimum 53mm recessed depth above the ceiling surface, plus clearance for the connector block and cable. Most plasterboard ceilings on timber joists provide adequate depth; suspended ceilings may need a deeper void depending on the grid system.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.