CyroLED Anti-Glare Bezel - Matt Black

The CyroLED Anti-Glare Bezel is an 86mm diameter ABS trim ring designed specifically for CyroLED Anti-Glare recessed downlights, finished in a non-reflective matt black. The bezel clips onto the downlight housing and provides a 5° projection from the ceiling plane, creating a recessed aperture that shields the LED light source from direct view at typical standing and seated eye-lines.

Used in offices, hospitality lounges, residential living rooms and commercial interiors where glare control matters, the bezel narrows the beam spread and prevents light spill into peripheral vision. The matt black finish absorbs rather than reflects ambient light, making the ceiling aperture visually recede and giving a cleaner, more defined ceiling plane. The ABS construction is lightweight, impact-resistant and dimensionally stable under normal operating temperatures.

The 86mm outer diameter matches standard UK ceiling cut-outs for recessed downlights, allowing the bezel to sit flush with plasterboard or solid ceilings without additional trimming. The matt black pairs cleanly with dark ceilings, industrial interiors, and contemporary schemes where metal tones (brass, chrome, copper) are used elsewhere as accent finishes. The bezel is compatible only with CyroLED Anti-Glare downlight models — check the downlight specification before ordering to confirm fitment.

Product Specification Sheet

Which downlights is this bezel compatible with?

The bezel is designed specifically for CyroLED Anti-Glare recessed downlight models. It will not fit standard CyroLED downlights or other brands — check the downlight model before ordering to confirm compatibility.

What does the 5° projection mean?

The bezel projects 5° from the ceiling plane, creating a recessed aperture that shields the LED light source from direct view at typical eye-lines. This reduces glare and narrows the effective beam spread.

Can the bezel be painted?

ABS can be painted with appropriate primers and paints designed for plastic surfaces, but doing so may alter the anti-glare performance of the matt finish. Most users install the bezel as-supplied.

What ceiling cut-out diameter is needed?

The 86mm diameter matches standard UK recessed downlight cut-outs. The bezel clips onto the downlight housing after the housing is installed in the ceiling void, so the cut-out size is determined by the downlight itself, not the bezel.