Description
The Citronic MIDI300 is a 3-metre MIDI lead built for connecting music controllers, keyboards, synths and other MIDI devices. It uses pro quality 180° 5-pin DIN plugs at both ends, so it fits the standard MIDI ports found on most gear. This is a straightforward, well made cable for anyone running a home studio or a live setup.
The lead is made with strong, flexible cable measuring 5.0mm in diameter, which holds up to regular plugging and unplugging without going stiff or fraying. Inside you get five conductors, each made of 10 strands of 0.1mm pure copper. Low loss conductors and global shielding keep your data stream clean and steady, which matters when you are sending timing and note information between devices.
At 3 metres, the MIDI300 gives you enough reach to link kit across a desk or a small stage without leaving too much slack. MIDI stands for Musical Instrument Digital Interface, and this cable carries the digital control signals rather than audio itself. If you need a reliable connection between two pieces of MIDI equipment, this lead does the job without fuss and should last you well.
Specification
| Length |
3.0m |
| Cable : diameter |
5.0mmØ |
| Conductors |
5 x 10 strand, 0.1mmØ pure copper |
| Connectors |
180° 5-pin DIN plug |
Frequently Asked
How long is the MIDI300 lead?
It is 3.0 metres long, which suits most desk and small stage layouts.
What connectors does it use?
Both ends have 180° 5-pin DIN plugs, the standard fitting for MIDI ports on most controllers, keyboards and synths.
Will it carry audio?
No. MIDI leads carry digital control data such as notes and timing, not audio signals. You will need a separate audio cable for sound.
What is the cable made from?
The cable is 5.0mm in diameter with five conductors, each made of 10 strands of 0.1mm pure copper, plus global shielding.
Is it suitable for live use?
Yes. The strong, flexible cable handles repeated plugging and unplugging, so it works well for both studio and live setups.