Description
The Cinto is a 1510mm tall LED wall light built around a looping antique brass frame with an integrated 20W LED bar running vertically through the centre. The LED delivers 1600 lumens at 3000K warm white, casting ambient light up and down the wall through the open frame structure. The light mounts to the wall via a backplate at the base and extends 160mm from the wall at its deepest point.
Designed for hallways, stairwells and living room feature walls where ceiling height allows, the Cinto provides accent lighting rather than primary illumination. The inline foot switch on the cable allows the light to be turned on and off without wall switching, and the removable plug top simplifies installation where a wall socket is already present. The 120mm width keeps the frame narrow enough to sit comfortably on walls without dominating the space.
The antique brass finish has a soft, aged patina that pairs with traditional, transitional and warm contemporary interiors. The looping frame creates a sculptural silhouette when the light is off and adds visual interest to plain walls. At 1.21kg, the fitting has enough mass to feel substantial without requiring reinforced wall fixings — standard cavity wall anchors or solid wall screws are sufficient for installation.
The integrated LED is non-replaceable and rated for approximately 25,000 hours of use at typical residential duty cycles. The light is not dimmable and operates on 220-240V mains. Mantra covers the fitting under a 3-year manufacturer warranty.
Specification
| Colour Finish 1 |
Antique Brass |
| Length |
160mm |
| Width |
120mm |
| Height |
1510mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Colour Temperature |
3000K Warm White |
| Lumen |
1600lm |
| Power Consumption |
20W |
| Voltage |
220-240V~50/60Hz |
| Dimmable |
No |
| Weight |
1.21KG |
| Warranty |
3 Year |
Frequently Asked
What ceiling height does the Cinto require?
The fitting is 1510mm tall and mounts to the wall with a backplate near floor level. For comfortable clearance in a hallway or living room, a ceiling height of at least 2.4m is recommended, though the light will physically fit in rooms with 2.2m ceilings.
Is the LED replaceable?
No. The 20W LED is integrated into the frame and is not user-replaceable. The LED is rated for approximately 25,000 hours of use, which equates to around 11 years at 6 hours per day.
Can it be used without the inline switch?
Yes. The inline foot switch is a convenience feature on the cable. If you prefer to control the light via a wall switch, the inline switch can remain permanently on and the light controlled from the wall socket or a wired wall switch.
How is the antique brass finished?
The antique brass finish has a soft, aged patina with darker tones in the recesses of the looped frame. This gives a warmer, less reflective appearance than polished brass and suits traditional and transitional interiors.