Bano Medium LED Crystal Chain Wall Light - French Gold

The Bano Medium is a 500mm crystal chain wall light with a French gold rectangular backplate and multiple strands of faceted clear crystal buttons cascading 280mm down the wall. An integrated 9W LED sits behind the backplate and casts 1160 lumens of 4000K cool white light through the crystal strands, which diffuse and refract the light across the wall surface.

Designed for living rooms, bedrooms, hallways and dining rooms where wall-mounted decorative lighting is preferred over pendants or ceiling fixtures, the Bano Medium works as a single accent or in pairs flanking a fireplace, sideboard or bed headboard. The 90mm projection keeps the fitting close to the wall, making it suitable for narrower hallways and beside furniture. The French gold finish carries a warm metallic tone that sits between polished brass and antique brass, pairing with warm-toned interiors, traditional joinery and darker wall colours.

The crystal buttons are strung in overlapping vertical strands, creating depth and multiple layers of refraction when the light is on. Each strand moves independently, so the fitting catches air movement in the room and creates subtle shifts in reflected light. The integrated LED is dimmable when paired with a compatible LED wall dimmer, allowing the output to be adjusted from full 1160lm down to a low ambient glow. The 500mm width suits walls with 600-700mm of clear horizontal space.

Is the Bano Medium dimmable?

Yes. The integrated LED is dimmable when paired with a compatible trailing-edge or leading-edge LED dimmer switch. Check with the dimmer manufacturer for compatibility with integrated LED wall lights before installation.

What colour is the light output?

The integrated LED produces 4000K cool white light at 1160 lumens. This is a neutral-to-cool tone that renders colours accurately and works well in contemporary interiors. It is cooler than the 2700K-3000K warm white found in traditional incandescent and halogen fittings.

Can it be installed in a bathroom?

The specification does not list an IP rating, so the Bano Medium is designed for dry indoor locations only. It should not be installed in bathrooms, wet rooms or other high-moisture environments.

How is the crystal cleaned?

Switch off the mains supply and allow the fitting to cool. Wipe each crystal strand gently with a dry microfibre cloth. For stubborn marks, a barely-damp cloth with distilled water is acceptable, but avoid soaking the crystals or allowing water to enter the backplate housing.