Description
The Bano Large is a 700mm crystal chain wall light with cascading strands of faceted crystal buttons suspended from a polished chrome backplate. An integrated 12W LED strip inside the chrome bar casts light through the crystal, creating refracted patterns across the strands. The crystals hang at staggered lengths creating a waterfall-style curtain with visible depth when viewed from the side.
Designed for feature wall positions in hallways, living rooms and over-bed installations where ceiling clearance is tight, the Bano Large projects just 90mm from the wall and sits flush to the mounting surface without requiring recessing. The 700mm width covers substantial wall area without overwhelming smaller rooms. The 4000K colour temperature produces a neutral white light that reads cooler than traditional warm white, pairing well with contemporary grey and white interiors.
The double-layer crystal configuration gives the fitting visual weight — the inner layer sits closer to the backplate while the outer strands extend further, creating optical depth when light passes through both layers. The polished chrome finish reflects surrounding light when the fitting is switched off, helping the fixture remain visually present during daytime. At 2.45kg, the fitting requires secure fixing to a wall capable of bearing the combined weight of the chrome bar, LED assembly and crystal strands.
The integrated LED is dimmable with a compatible leading-edge or trailing-edge dimmer installed at the switch position. Dimmer compatibility varies by model — test with your specific dimmer before final installation. The 1460 lumen output at full brightness provides sufficient light for the fitting to act as primary wall lighting in a hallway or bedroom, not just decorative accent.
Specification
| Colour Finish 1 |
Polished Chrome |
| Width |
700mm |
| Height |
280mm |
| Projection |
90mm |
| Number Of Bulbs |
1 |
| Lamp Socket |
Integrated LED |
| Max Wattage |
12W |
| Lamp Included |
Yes - Integrated |
| Colour Temperature |
4000K Cool White |
| Beam Angle |
120° |
| Lumen |
1460lm |
| Power Consumption |
13.5W |
| Voltage |
100-240V~50/60Hz |
| Dimmable |
Yes - Suitable Dimmer Required |
| Weight |
2.45KG |
| Warranty |
3 Years |
Frequently Asked
Is the Bano Large dimmable?
Yes. The integrated LED is dimmable with a compatible leading-edge or trailing-edge dimmer installed at the wall switch. Dimmer compatibility depends on the specific dimmer model — test before final installation to confirm smooth dimming without flicker.
What's the difference between the Bano Large and standard Bano?
The Bano Large measures 700mm wide versus the standard version at 500mm. Both use the same double-layer crystal configuration and integrated LED, but the Large version covers more wall area and produces higher total lumen output.
Can it be used in a bathroom?
The Bano Large carries no stated IP rating, so it is suitable only for dry interior locations. Do not install in bathrooms or other areas where moisture or splashing may occur.
How are the crystals cleaned?
Switch off the fitting and allow it to cool. Wipe each crystal strand with a dry microfibre cloth. For heavier dust build-up, a barely-damp cloth is acceptable, but avoid soaking the crystals or allowing water to run into the chrome backplate where the LED assembly sits.