Description
A neat square face in anthracite, this outdoor wall light keeps its lines simple and its bulk to a minimum. The body measures 16cm across and stands only about 3cm clear of the wall, so it reads as a quiet panel of light rather than a lantern. The LED is built in and draws 6W, giving a warm white glow that falls softly across the surface it is fitted to. There is no dimming and no switch on the fitting itself, so it works from whatever control the circuit already has.
We reach for this one on front and back doors, porch walls, side passages and the blank stretch of a garage or garden wall where a projecting lantern would be knocked or would simply look too heavy. A pair set either side of a door gives even light on the threshold; a run of three or four along a boundary wall marks a path without glare at eye level. It suits flats and balconies too, where anything deep would get in the way. The driver sits inside the fitting, so nothing extra is needed alongside it.
The finish is a matt anthracite that holds its own against brick, render and grey timber, and hides rain marks better than a pale colour will. Keep it looking well by wiping the face and edges with a damp cloth on a dry day, then drying it off; a soft brush clears cobwebs and grit from the underside of the housing. It carries a three year warranty. We stock the same square shape in rust brown and sand white, and there is a round version of the Baker in all three finishes if you prefer a softer outline, including smaller round and square sizes for tighter spots. As the LED is integrated, there is nothing to plug in or swap out later.
Specification
| Colour |
Anthracite |
| Wall Mountable |
Yes |
| Weight |
0.40KG |
| Width |
160mm |
| Height |
160mm |
| Projection |
30mm |
| Materials Used |
Aluminium Die-Casting Body+Polycarbonate Diffuser |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 6W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| No. of Switching Cycles |
30000 |
| Average Life of LED (hrs) |
50000hrs |
| SMD Chipset |
2835 / 0.2W |
| LED Power (W) |
0.2W (±5%) |
| Type of LED |
SMD 2835 0.2W |
| Lumens Per Watt (lm/W) |
70lm/W (±5%) |
| Beam Angle (°) |
85° |
| System Flux (lm) |
420lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Down |
| Driver Included |
Yes - Driver On Board |
| Type of Driver |
Constant Current |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
6W (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Average Life (hrs) |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Base Material |
Aluminium, PC |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How far does it stand out from the wall?
Only 30mm, with a face measuring 160mm by 160mm. It is one of the slimmest outdoor wall lights we stock, which makes it useful in narrow passages and beside doorways.
Can I dim it?
No. The integrated LED is non-dimmable, so it should be run from a plain switched circuit rather than a dimmer.
What colour is the light?
Warm white at 3000K, a soft yellow-toned light that flatters brick, render and stone rather than cooling them down.
Will the LED need replacing?
There is no lamp to change. The LED is built in and rated at an average life of 30,000 hours, with the driver housed on board.
Is it suitable for an exposed wall?
It is rated IP54, so it copes with dust and splashing water and is intended for normal outdoor positions such as porches, patios and boundary walls.
How heavy is it?
0.4kg, so it is a light fitting to handle at 6W.