Description
This is a small round disc of light for doorways and walkways, finished in a deep grey anthracite that reads almost black against brick and render. The face measures 16cm across and the body keeps a shallow projection, so it stays tight to the wall rather than jutting out at shoulder height. Light comes from a built-in LED running at 6W, a warm white that is soft rather than sharp, and there is no dimming and no switch on the fitting itself. It carries a three year warranty.
We reach for this where a lantern would feel too fussy: a back door, a side passage, a garden wall beside steps, or a pair placed either side of a porch. It is sealed against dust and splashing rain, so it copes happily with a wall that catches the weather. The warm tone sits well with older brick and timber as well as painted render, and the light spreads from the face rather than gathering into a narrow cone, giving a broad wash that helps with keys, a bin store or the edge of a path. Switching or sensor control is taken from the circuit it runs on.
The anthracite is a low sheen, matt-leaning finish that hides marks and dulls glare from daylight, and the round face gives a clean line that suits modern and older houses alike. For care, brush cobwebs and grit off the face now and then and wipe it with a cloth wrung out in warm water once the light has been off long enough to cool. We stock the round shape in a smaller size too, and in rust brown and sand white, with square versions in the same range if you prefer a straight edge. Since the LED is built into the fitting, there is nothing to change and nothing to buy alongside it.
Specification
| Colour |
Anthracite |
| Wall Mountable |
Yes |
| Weight |
0.35KG |
| Diameter |
160mm |
| Projection |
30mm |
| Materials Used |
Aluminium Die-Casting Body+Polycarbonate Diffuser |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 6W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| No. of Switching Cycles |
30000 |
| Average Life of LED (hrs) |
50000hrs |
| SMD Chipset |
2835 / 0.2W |
| LED Power (W) |
0.2W (±5%) |
| Type of LED |
SMD 2835 0.2W |
| Lumens Per Watt (lm/W) |
70lm/W (±5%) |
| Beam Angle (°) |
83° |
| System Flux (lm) |
420lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Down |
| Driver Included |
Yes - Driver On Board |
| Type of Driver |
Constant Current |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
6W (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Average Life (hrs) |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Base Material |
Aluminium, PC |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
How far does it stick out from the wall?
The projection is 30mm, so it sits almost flat against the face of the wall.
What colour is the light?
3000K warm white, a gentle yellow-toned light rather than a cool blue-white one.
Can I dim it?
No. It is a non-dimmable fitting and should be run on a plain switched circuit.
How long should the LED last?
It is rated at 30,000 hours of average life, which is many years of evening use outdoors.
Is it suitable for a wall that gets rained on?
Yes. It is rated IP54, which covers dust and splashing water from any direction, so an exposed house wall or garden wall is fine.
What size is the round face?
160mm in diameter, and the fitting weighs 0.35kg.