Description
A small round disc of light for outside walls, this one measures 11cm across and sits so close to the wall that it reads as part of the brickwork rather than an object hung on it. The LED is built in and rated at 3W, so what you get is a soft warm white glow that grazes the surface it is fixed to rather than a bright wash across the whole garden. The rust brown finish has a weathered, mineral look to it that works well against brick, render and timber cladding.
We reach for these where a lantern would be too much: either side of a front door, spaced along a side passage, or stepped down a garden wall to mark a path after dark. The light is modest by design, so think of it as orientation and atmosphere rather than task lighting, and plan on more than one if you are lighting a longer run. It is rated for outdoor conditions, coping with rain and windblown dust, which makes it as happy on an exposed porch as under a sheltered canopy. Renters with a small balcony and owners of a courtyard garden both tend to like how little visual space it takes up.
The finish is applied over a compact body with a flat diffuser face, and it is not dimmable, so a plain switch or a timer is the sensible way to control it. To keep it looking well, wipe the face and rim with a damp cloth and dry it off, ideally at the end of winter when grime tends to build up, and keep solvents and scouring pads away from the coating. It carries a three year warranty. We also stock the round shape in anthracite and sand white, a larger round version, and a square form in this same rust brown if you prefer straight edges.
Specification
| Colour |
Rust Brown |
| Wall Mountable |
Yes |
| Weight |
0.23KG |
| Diameter |
110mm |
| Projection |
22mm |
| Materials Used |
Aluminium Die-Casting Body+Polycarbonate Diffuser |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 3W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| No. of Switching Cycles |
30000 |
| Average Life of LED (hrs) |
50000hrs |
| SMD Chipset |
2835 / 0.2W |
| LED Power (W) |
0.2W (±5%) |
| Type of LED |
SMD 2835 0.2W |
| Lumens Per Watt (lm/W) |
70lm/W (±5%) |
| Beam Angle (°) |
84° |
| System Flux (lm) |
210lm (±5%) |
| CRI |
>80 |
| Light Distribution |
Down |
| Driver Included |
Yes - Driver On Board |
| Type of Driver |
Constant Current |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
3W (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Switch |
Not Switched |
| Dimmable |
No |
| IP Rating |
IP54 |
| Average Life (hrs) |
50000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| Pieces Included |
1 |
| Unassembled |
No |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. |
| Country of Origin |
China |
Frequently Asked
How much light does it give out?
It produces 210 lumens from a 3W integrated LED, which is enough to mark a doorway or path edge and add a warm glow to a wall. For a brighter effect, use several along a run or step up to the 6W large round version.
What colour is the light?
3000K warm white, a soft yellow-toned light that flatters brick, stone and timber and matches the rest of the Baker range.
How far does it stand off the wall?
The body is 110mm in diameter with a projection of just 22mm, so it stays clear of doorways, gates and narrow passages.
Can it be dimmed?
No, it is a non-dimmable fitting. Switch it from a standard switch, a timer or an external photocell rather than a dimmer.
Will it cope with rain?
Yes, it is made for outdoor use and is sealed against dust and splashing water, so it is fine on an open wall as well as under a porch.
Do I need to replace the lamp at any point?
The LED is integrated and rated at 50,000 hours, so there is nothing to change. The fitting also carries a three year warranty.