Description
A small square face in anthracite, 80mm across, with the light source set back and angled so the beam falls downward rather than out at eye level. The integrated LED draws 3W and gives a warm white light, enough to pick out a step edge or the line of a path without glare. There is no lamp to change and no dimming, so it runs simply from a switch, a timer or a photocell.
Outdoors it suits boundary walls, porch reveals, steps and the low walls around a terrace, where a run of several gives an even rhythm of light at ankle height. At 210 lumens each, one on its own is a marker rather than a source of general light, so we would plan them in pairs and short runs along a route. They are sealed against rain and wind driven wet, and the same fitting is at home in a covered passage or a garage wall. We would choose these for a client who wants the light and not the fitting.
The body is finished in anthracite, a dark grey that reads almost black once the light is on and settles quietly against stone, render and dark timber. The driver is supplied with it. Upkeep asks little: with the power off, brush cobwebs and leaf litter from the recess, then wipe the lens with a damp cloth so the beam stays clean. It carries a three year warranty. We also stock the same fitting with a round face and with an eyelid front, and in sand black and sand white if anthracite reads too dark against a pale wall. The LED is built in, so there is no bulb to buy.
Specification
| Colour |
Anthracite |
| Wall Mountable |
Yes |
| Recessable |
Yes |
| Weight |
0.20KG |
| Length |
80mm |
| Width |
80mm |
| Height |
85mm |
| Cut Out (mm) |
72mm |
| Materials Used |
Aluminium Die-Casting Body+Polycarbonate Diffuser |
| Energy Class |
G |
| Energy Class of Lamp |
Group A |
| Max Energy Class |
G |
| Min Energy Class |
G |
| Lamp |
1 x 3W integrated LED (no lamps to fit) |
| Lamp Cap |
Integral LED |
| Recommended Lamp |
Integral LED |
| Colour Temperature |
3000K Warm White (±5%) |
| No. of Switching Cycles |
30000 |
| Average Life of LED (hrs) |
50000hrs |
| LED Brand |
KEGU |
| SMD Chipset |
3535 |
| LED Power (W) |
3W (±5%) |
| Type of LED |
3535 |
| Lumens Per Watt (lm/W) |
70lm/W (±5%) |
| Beam Angle (°) |
55° |
| System Flux (lm) |
210lm (±5%) |
| CRI |
>80 |
| Driver Included |
Yes |
| Type of Driver |
Constant Current |
| Constant Current Output (mA) |
700mA |
| Protection Class |
Class 1 - Earth Connection Required |
| Total Power Consumption (W) |
3W (±5%) |
| Input Voltage (V) |
220-240V~50/60Hz |
| Dimmable |
No |
| IP Rating |
IP65 |
| Average Life (hrs) |
30000hrs |
| Warranty |
3yrs |
| UKCA/CE |
Yes |
| TUV |
Yes |
| Pieces Included |
1 |
| Installation |
Requires Installation By Qualified Electrician |
| Product Care |
(1) Wipe clean with a dry cloth, do not use any cleaning detergents, do not use rough or coarse material to clean. (2) Ensure light is not illuminated when cleaning. |
| Country of Origin |
China |
Frequently Asked
What size opening does the fitting sit in?
The cut out is 72mm. The visible face measures 80mm by 80mm, with an overall depth of 85mm behind it.
How bright is one light, and what colour is the light?
Each gives 210lm at 3000K warm white, from a 3W integrated LED with a 55 degree beam and a colour rendering index above 80.
Can it be dimmed?
No, it is non-dimmable. Switching, timers or a photocell are the ways to control it.
Is it suitable for a fully exposed wall?
Yes. It is rated IP65, so driving rain and wash down from a hose are not a problem.
Does it need a separate driver or transformer?
No, the driver is included with the fitting. It is a Class 1 product requiring an earth connection.
How long should the LED last?
The rated average life is 30,000 hours, so in normal evening use it should run for many years before output starts to fall.