Free Delivery on all orders over £99*

4 Gang 2 Way 10-200W Intelligent Dimmer - Matt Black

£5599
The RRP is the manufacturer's recommended retail price of the item.
90 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge CL2194MBB is a 4-gang 2-way intelligent dimmer supporting 10-200W incandescent loads or 5-150W LED loads per gang, controlled via four rotary knobs on a matt black rounded-edge faceplate. Each gang can switch between trailing-edge and leading-edge dimming modes using the control knob itself, allowing the dimmer to adapt to different lamp types without requiring plate removal or rewiring.

Designed for residential and hospitality lighting where individual circuit control is needed across four zones or four separate fittings, the dimmer suits downlighters, wall lights, pendant circuits and table lamp circuits on a single plate. The 2-way wiring configuration allows the same circuits to be dimmed from two locations, pairing this plate with standard 2-way intermediate switches elsewhere in the room. Each knob provides push on/off action and rotary dimming, with the dimming level stored in memory when switched off.

The intelligent dimming mechanism includes overload protection, overheat protection and an inrush current limiter to handle the initial surge when LED lamps are switched on. Trim adjustment, mode switching and reset functions are all accessible from the front of the plate via the control knobs, so recalibration after changing a lamp or fitting does not require dismounting the faceplate. The matt black finish on premium-grade steel provides a low-glare surface that pairs with contemporary, industrial and monochrome interiors, and the rounded-edge profile sits 7.5mm proud of the wall once fitted to a 25mm back box.

Each gang must control lamps of the same brand, type and wattage — mixed lamp brands or mixed wattages on a single gang will cause flickering or failure to dim smoothly. The dimmer is preset to trailing-edge mode on installation, which suits most LED retrofit lamps, and can be switched to leading-edge mode where older transformers or specific lamp types require it.

Specification
Height 87.75 mm
Width 146.5 mm
Projection 7.5 mm
Min. Mounting Box Depth 25mm
Construction Premium grade steel
Finish Matt Black
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

What's the difference between trailing-edge and leading-edge dimming?

Trailing-edge dimming (the preset mode) suits most modern LED retrofit lamps and electronic transformers. Leading-edge dimming suits older magnetic transformers and some incandescent loads. If an LED lamp flickers or buzzes on trailing-edge, switch the gang to leading-edge mode using the control knob.

Can I mix different lamp brands on one gang?

No. Each gang must control lamps of the same brand, type and wattage. Mixing brands or wattages on a single circuit will cause uneven dimming, flickering or failure to dim smoothly. This is a limitation of all intelligent dimmers, not specific to this model.

What back box depth is required?

A 25mm minimum back box depth is needed. The plate projects 7.5mm from the wall once fitted, giving a total depth of approximately 32.5mm from the wall surface to the back of the back box.

How do I adjust the minimum dim level?

Turn the knob fully anticlockwise to the minimum position, then press and hold the knob for approximately 5 seconds until the lamp flickers. Release, then rotate the knob to set the new minimum dim level. Press the knob briefly to save the setting. Full instructions are in the specification sheet.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge CL2194MBB is a 4-gang 2-way intelligent dimmer supporting 10-200W incandescent loads or 5-150W LED loads per gang, controlled via four rotary knobs on a matt black rounded-edge faceplate. Each gang can switch between trailing-edge and leading-edge dimming modes using the control knob itself, allowing the dimmer to adapt to different lamp types without requiring plate removal or rewiring.

    Designed for residential and hospitality lighting where individual circuit control is needed across four zones or four separate fittings, the dimmer suits downlighters, wall lights, pendant circuits and table lamp circuits on a single plate. The 2-way wiring configuration allows the same circuits to be dimmed from two locations, pairing this plate with standard 2-way intermediate switches elsewhere in the room. Each knob provides push on/off action and rotary dimming, with the dimming level stored in memory when switched off.

    The intelligent dimming mechanism includes overload protection, overheat protection and an inrush current limiter to handle the initial surge when LED lamps are switched on. Trim adjustment, mode switching and reset functions are all accessible from the front of the plate via the control knobs, so recalibration after changing a lamp or fitting does not require dismounting the faceplate. The matt black finish on premium-grade steel provides a low-glare surface that pairs with contemporary, industrial and monochrome interiors, and the rounded-edge profile sits 7.5mm proud of the wall once fitted to a 25mm back box.

    Each gang must control lamps of the same brand, type and wattage — mixed lamp brands or mixed wattages on a single gang will cause flickering or failure to dim smoothly. The dimmer is preset to trailing-edge mode on installation, which suits most LED retrofit lamps, and can be switched to leading-edge mode where older transformers or specific lamp types require it.

    Specification
    Height 87.75 mm
    Width 146.5 mm
    Projection 7.5 mm
    Min. Mounting Box Depth 25mm
    Construction Premium grade steel
    Finish Matt Black
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    What's the difference between trailing-edge and leading-edge dimming?

    Trailing-edge dimming (the preset mode) suits most modern LED retrofit lamps and electronic transformers. Leading-edge dimming suits older magnetic transformers and some incandescent loads. If an LED lamp flickers or buzzes on trailing-edge, switch the gang to leading-edge mode using the control knob.

    Can I mix different lamp brands on one gang?

    No. Each gang must control lamps of the same brand, type and wattage. Mixing brands or wattages on a single circuit will cause uneven dimming, flickering or failure to dim smoothly. This is a limitation of all intelligent dimmers, not specific to this model.

    What back box depth is required?

    A 25mm minimum back box depth is needed. The plate projects 7.5mm from the wall once fitted, giving a total depth of approximately 32.5mm from the wall surface to the back of the back box.

    How do I adjust the minimum dim level?

    Turn the knob fully anticlockwise to the minimum position, then press and hold the knob for approximately 5 seconds until the lamp flickers. Release, then rotate the knob to set the new minimum dim level. Press the knob briefly to save the setting. Full instructions are in the specification sheet.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.