Free Delivery on all orders over £99*

4 Gang 2-Way 10-200W Intelligent Dimmer - Brushed Chrome Square Edge

£6399
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge CS2194BC is a 4-gang 2-way intelligent dimmer handling 10-200W incandescent loads or 5-150W LED loads per gang, behind a brushed chrome square edge faceplate. Each gang operates independently via a push on/off and rotary dimming action, allowing four separate lighting zones to be controlled from a single plate. The dimmer can switch between trailing-edge and leading-edge modes from the front of the plate, providing compatibility with a wide range of dimmable lamps without needing to replace the dimmer unit.

Designed for residential installation in living rooms, home theatres, dining rooms and bedrooms where multiple lighting circuits need individual dimming control, the 4-gang configuration suits rooms with a combination of ceiling lights, wall lights, floor lamps and table lamps wired to separate circuits. The 2-way switching allows the same lighting zone to be controlled from a second dimmer or switch elsewhere in the room. The plate fits a standard 25mm minimum back box depth and projects 10.5mm from the wall once installed.

The dimmer includes overload and overheat protection, plus an inrush current limiter that prevents voltage spikes when the circuit is first energised. All mode switching, trimming and resetting is done via the control knobs on the front of the plate, so adjustments can be made after installation without removing the faceplate or accessing rear terminals. The brushed chrome finish provides a cool metallic accent with a directional grain that reduces fingerprints and pairs well with contemporary and industrial interiors.

Each gang must be loaded with identical dimmable lamps of the same wattage and brand within the same fitting — mixing lamp types or wattages on a single gang will cause flicker or failure. The dimmer is preset to trailing-edge mode on installation, which suits most modern dimmable LED and CFL lamps. Leading-edge mode is available where older incandescent, halogen or certain magnetic transformer loads are present.

Specification
Height 89 mm
Width 149.3 mm
Projection 10.5 mm
Min. Mounting Box Depth 25mm
Construction Premium grade steel
Finish Brushed Chrome
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

What's the difference between trailing-edge and leading-edge mode?

Trailing-edge mode suits most modern dimmable LED and CFL lamps by cutting the trailing edge of the AC waveform. Leading-edge mode cuts the leading edge and suits older incandescent, halogen and certain magnetic transformer loads. The dimmer is preset to trailing-edge on installation and can be switched to leading-edge via the front control knob if needed.

Can I mix different lamp types on the same gang?

No. Each gang must use identical dimmable lamps of the same wattage and brand. Mixing lamp types, wattages or brands on a single gang will cause flicker, buzzing or premature lamp failure.

What back box depth is required?

A 25mm minimum back box depth is needed. The plate projects 10.5mm from the wall once installed, giving a total depth of approximately 35.5mm from the back of the box to the front of the faceplate.

Can this be used in a 2-way switching setup?

Yes. The dimmer supports 2-way switching, allowing the same lighting zone to be controlled from a second dimmer or switch elsewhere in the room. Standard 2-way wiring is required.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge CS2194BC is a 4-gang 2-way intelligent dimmer handling 10-200W incandescent loads or 5-150W LED loads per gang, behind a brushed chrome square edge faceplate. Each gang operates independently via a push on/off and rotary dimming action, allowing four separate lighting zones to be controlled from a single plate. The dimmer can switch between trailing-edge and leading-edge modes from the front of the plate, providing compatibility with a wide range of dimmable lamps without needing to replace the dimmer unit.

    Designed for residential installation in living rooms, home theatres, dining rooms and bedrooms where multiple lighting circuits need individual dimming control, the 4-gang configuration suits rooms with a combination of ceiling lights, wall lights, floor lamps and table lamps wired to separate circuits. The 2-way switching allows the same lighting zone to be controlled from a second dimmer or switch elsewhere in the room. The plate fits a standard 25mm minimum back box depth and projects 10.5mm from the wall once installed.

    The dimmer includes overload and overheat protection, plus an inrush current limiter that prevents voltage spikes when the circuit is first energised. All mode switching, trimming and resetting is done via the control knobs on the front of the plate, so adjustments can be made after installation without removing the faceplate or accessing rear terminals. The brushed chrome finish provides a cool metallic accent with a directional grain that reduces fingerprints and pairs well with contemporary and industrial interiors.

    Each gang must be loaded with identical dimmable lamps of the same wattage and brand within the same fitting — mixing lamp types or wattages on a single gang will cause flicker or failure. The dimmer is preset to trailing-edge mode on installation, which suits most modern dimmable LED and CFL lamps. Leading-edge mode is available where older incandescent, halogen or certain magnetic transformer loads are present.

    Specification
    Height 89 mm
    Width 149.3 mm
    Projection 10.5 mm
    Min. Mounting Box Depth 25mm
    Construction Premium grade steel
    Finish Brushed Chrome
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    What's the difference between trailing-edge and leading-edge mode?

    Trailing-edge mode suits most modern dimmable LED and CFL lamps by cutting the trailing edge of the AC waveform. Leading-edge mode cuts the leading edge and suits older incandescent, halogen and certain magnetic transformer loads. The dimmer is preset to trailing-edge on installation and can be switched to leading-edge via the front control knob if needed.

    Can I mix different lamp types on the same gang?

    No. Each gang must use identical dimmable lamps of the same wattage and brand. Mixing lamp types, wattages or brands on a single gang will cause flicker, buzzing or premature lamp failure.

    What back box depth is required?

    A 25mm minimum back box depth is needed. The plate projects 10.5mm from the wall once installed, giving a total depth of approximately 35.5mm from the back of the box to the front of the faceplate.

    Can this be used in a 2-way switching setup?

    Yes. The dimmer supports 2-way switching, allowing the same lighting zone to be controlled from a second dimmer or switch elsewhere in the room. Standard 2-way wiring is required.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.