Free Delivery on all orders over £99*

3 Gang 2-Way 10-200W Intelligent Dimmer - Brushed Chrome Rounded Edge

£4399
The RRP is the manufacturer's recommended retail price of the item.
150 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge CL2193BC is a 3-gang 2-way intelligent dimmer rated for 10-200W incandescent loads or 5-150W LED loads per gang, mounted on a brushed chrome rounded-edge faceplate. Each gang operates independently via push on/off and rotary dimming controls, with all three knobs built into a single-width steel plate. The dimmer switches between trailing-edge and leading-edge modes from the front of the plate, providing compatibility with most dimmable LED, halogen and incandescent lamps without needing to rewire or change the faceplate.

Designed for multi-zone lighting control in living rooms, bedrooms and home cinemas where separate circuits need independent dimming, the unit requires a standard 25mm minimum back box depth and uses screw terminals for permanent wiring. The 2-way switching function allows the dimmer to be paired with another switch at a different location on the same circuit, so a hallway or landing can be controlled from both ends while retaining dimming at one end. The preset trailing-edge mode suits most modern dimmable LED bulbs out of the box, while the front-accessible mode switch allows adjustment if lamps are changed later.

The brushed chrome finish has a directional grain that softens reflections and pairs with stainless steel appliances, chrome bathroom fixtures and contemporary metallic interiors. The rounded edge softens the profile against the wall compared to flat-edge plates, and the rotary knobs sit flush with the faceplate when fully dimmed. Built-in overload and overheat protection shuts the dimmer down if it exceeds safe operating temperature, while the inrush current limiter prevents LED driver damage during switch-on surges.

Specification
Height 85.75 mm
Width 146.5 mm
Projection 7.5 mm
Min. Mounting Box Depth 25mm
Construction Premium grade steel
Finish Brushed Chrome
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

What's the difference between trailing-edge and leading-edge dimming?

Trailing-edge dimming cuts the back end of the AC waveform and suits most dimmable LED and low-voltage electronic transformers. Leading-edge dimming cuts the front end and suits traditional incandescent, halogen and magnetic transformers. The CL2193BC ships in trailing-edge mode but can be switched to leading-edge from the front if your lamps flicker or won't dim smoothly.

Can I mix different bulb types on one gang?

No. Each gang must control lamps of the same brand, type and wattage. Mixing different LED brands or different wattages on the same circuit causes uneven dimming and can damage the dimmer or the lamps.

What back box depth is required?

A 25mm minimum back box depth is needed for safe installation. The faceplate adds 7.5mm of projection from the wall once fitted.

What's the maximum total load?

Each of the three gangs can handle 10-200W incandescent or 5-150W LED independently. If all three gangs are loaded to maximum LED capacity simultaneously, the total load would be 450W across the three circuits.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge CL2193BC is a 3-gang 2-way intelligent dimmer rated for 10-200W incandescent loads or 5-150W LED loads per gang, mounted on a brushed chrome rounded-edge faceplate. Each gang operates independently via push on/off and rotary dimming controls, with all three knobs built into a single-width steel plate. The dimmer switches between trailing-edge and leading-edge modes from the front of the plate, providing compatibility with most dimmable LED, halogen and incandescent lamps without needing to rewire or change the faceplate.

    Designed for multi-zone lighting control in living rooms, bedrooms and home cinemas where separate circuits need independent dimming, the unit requires a standard 25mm minimum back box depth and uses screw terminals for permanent wiring. The 2-way switching function allows the dimmer to be paired with another switch at a different location on the same circuit, so a hallway or landing can be controlled from both ends while retaining dimming at one end. The preset trailing-edge mode suits most modern dimmable LED bulbs out of the box, while the front-accessible mode switch allows adjustment if lamps are changed later.

    The brushed chrome finish has a directional grain that softens reflections and pairs with stainless steel appliances, chrome bathroom fixtures and contemporary metallic interiors. The rounded edge softens the profile against the wall compared to flat-edge plates, and the rotary knobs sit flush with the faceplate when fully dimmed. Built-in overload and overheat protection shuts the dimmer down if it exceeds safe operating temperature, while the inrush current limiter prevents LED driver damage during switch-on surges.

    Specification
    Height 85.75 mm
    Width 146.5 mm
    Projection 7.5 mm
    Min. Mounting Box Depth 25mm
    Construction Premium grade steel
    Finish Brushed Chrome
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    What's the difference between trailing-edge and leading-edge dimming?

    Trailing-edge dimming cuts the back end of the AC waveform and suits most dimmable LED and low-voltage electronic transformers. Leading-edge dimming cuts the front end and suits traditional incandescent, halogen and magnetic transformers. The CL2193BC ships in trailing-edge mode but can be switched to leading-edge from the front if your lamps flicker or won't dim smoothly.

    Can I mix different bulb types on one gang?

    No. Each gang must control lamps of the same brand, type and wattage. Mixing different LED brands or different wattages on the same circuit causes uneven dimming and can damage the dimmer or the lamps.

    What back box depth is required?

    A 25mm minimum back box depth is needed for safe installation. The faceplate adds 7.5mm of projection from the wall once fitted.

    What's the maximum total load?

    Each of the three gangs can handle 10-200W incandescent or 5-150W LED independently. If all three gangs are loaded to maximum LED capacity simultaneously, the total load would be 450W across the three circuits.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.