Free Delivery on all orders over £99*

2 Gang 2 Way Intelligent Dimmer 10-200W LED - Matt Black Rounded Edge

£2399
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge CL2192MBB is a 2-gang 2-way intelligent dimmer switch rated at 10-200W per gang (5-150W LED), housed in a matt black rounded-edge metal faceplate with matching matt black rotary control caps. The dimmer can switch between trailing-edge and leading-edge modes from the front plate using the control knob, making it compatible with a wide range of dimmable LED, halogen and incandescent lamps without needing to replace the module when lamp types change.

Designed for residential and light commercial installation where two separate lighting circuits need dimming control from a single faceplate, the 2-gang configuration allows independent dimming of two different light fittings or zones. The 2-way wiring supports switching from two locations, so the dimmer can be paired with a second switch elsewhere in the room to control the same lights. The rotary action provides push on/off function and continuous rotation for dimming, with soft-start and soft-stop built in to extend lamp life.

The dimmer ships pre-set to trailing-edge mode, which suits most modern dimmable LED lamps and electronic transformers. Leading-edge mode supports older resistive and inductive loads including halogen lamps on magnetic transformers. Mode switching, minimum brightness trimming and factory reset are all accessible from the front plate without removing the faceplate or isolating supply. The dimmer includes overload and overheat protection plus an inrush current limiter to handle the higher initial current draw when switching on capacitive LED drivers.

The matt black finish provides a low-sheen surface that sits comfortably in contemporary, industrial and dark-toned interiors. The rounded edge profile softens the transition between wall and faceplate compared to sharp-edged alternatives. The premium-grade steel construction gives the faceplate rigidity and resistance to surface wear from repeated use.

Specification
Height 87.75 mm
Width 87.75 mm
Projection 7.5 mm
Min. Mounting Box Depth 25mm
Construction Premium grade steel
Finish Matt Black
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

What back box depth is required?

A 25mm minimum back box depth is needed for safe installation. The dimmer module sits behind the faceplate and requires clearance for the terminals and control electronics.

Can I use this with LED bulbs?

Yes, provided the LED bulbs are marked as dimmable. The dimmer supports 5-150W LED loads per gang in trailing-edge mode, which suits most modern dimmable LED lamps. Do not mix different LED brands or wattages within the same fitting, as this can cause flickering or incomplete dimming.

How do I switch between trailing-edge and leading-edge modes?

Mode switching is done from the front plate using the rotary control knob. Press and hold the knob while rotating to access the mode selection menu. The full procedure is detailed in the specification sheet linked above.

What does 2-way wiring mean?

2-way wiring allows the same lighting circuit to be controlled from two separate switch locations. The dimmer is installed at one location and paired with a standard 2-way switch at the second location, enabling on/off control from both points with dimming only available at the dimmer location.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge CL2192MBB is a 2-gang 2-way intelligent dimmer switch rated at 10-200W per gang (5-150W LED), housed in a matt black rounded-edge metal faceplate with matching matt black rotary control caps. The dimmer can switch between trailing-edge and leading-edge modes from the front plate using the control knob, making it compatible with a wide range of dimmable LED, halogen and incandescent lamps without needing to replace the module when lamp types change.

    Designed for residential and light commercial installation where two separate lighting circuits need dimming control from a single faceplate, the 2-gang configuration allows independent dimming of two different light fittings or zones. The 2-way wiring supports switching from two locations, so the dimmer can be paired with a second switch elsewhere in the room to control the same lights. The rotary action provides push on/off function and continuous rotation for dimming, with soft-start and soft-stop built in to extend lamp life.

    The dimmer ships pre-set to trailing-edge mode, which suits most modern dimmable LED lamps and electronic transformers. Leading-edge mode supports older resistive and inductive loads including halogen lamps on magnetic transformers. Mode switching, minimum brightness trimming and factory reset are all accessible from the front plate without removing the faceplate or isolating supply. The dimmer includes overload and overheat protection plus an inrush current limiter to handle the higher initial current draw when switching on capacitive LED drivers.

    The matt black finish provides a low-sheen surface that sits comfortably in contemporary, industrial and dark-toned interiors. The rounded edge profile softens the transition between wall and faceplate compared to sharp-edged alternatives. The premium-grade steel construction gives the faceplate rigidity and resistance to surface wear from repeated use.

    Specification
    Height 87.75 mm
    Width 87.75 mm
    Projection 7.5 mm
    Min. Mounting Box Depth 25mm
    Construction Premium grade steel
    Finish Matt Black
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    What back box depth is required?

    A 25mm minimum back box depth is needed for safe installation. The dimmer module sits behind the faceplate and requires clearance for the terminals and control electronics.

    Can I use this with LED bulbs?

    Yes, provided the LED bulbs are marked as dimmable. The dimmer supports 5-150W LED loads per gang in trailing-edge mode, which suits most modern dimmable LED lamps. Do not mix different LED brands or wattages within the same fitting, as this can cause flickering or incomplete dimming.

    How do I switch between trailing-edge and leading-edge modes?

    Mode switching is done from the front plate using the rotary control knob. Press and hold the knob while rotating to access the mode selection menu. The full procedure is detailed in the specification sheet linked above.

    What does 2-way wiring mean?

    2-way wiring allows the same lighting circuit to be controlled from two separate switch locations. The dimmer is installed at one location and paired with a standard 2-way switch at the second location, enabling on/off control from both points with dimming only available at the dimmer location.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.