Free Delivery on all orders over £99*

2 Gang 2-Way 10-200W (5-150W LED) Intelligent Dimmer - Brushed Chrome Rounded Edge

£2399
The RRP is the manufacturer's recommended retail price of the item.
150 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 2-gang 2-way intelligent dimmer controls two separate lighting circuits from a single faceplate, handling 10-200W incandescent or halogen loads per gang, or 5-150W LED loads per gang. The dimmer is pre-set in trailing-edge mode and can be switched to leading-edge mode from the front panel using the control knob, making it compatible with most dimmable LED, halogen and incandescent bulbs.

Designed for residential and light commercial installation in living rooms, bedrooms and dining rooms where two separate lighting zones need independent dimming control from one location, the dimmer fits standard UK 25mm back boxes. Each gang operates via a push on/off action and rotary dimming knob, with the control caps and faceplate finished in brushed chrome with rounded edges. The 2-way wiring allows the same lights to be controlled from two different switch positions.

The dimmer includes overload and overheat protection, plus an integrated inrush current limiter to handle the initial power draw when LED circuits are switched on. The faceplate is premium-grade steel with a brushed finish that resists fingerprints and sits flush to the wall with 7.5mm projection. Mode switching, trimming adjustments and factory reset are all accessible from the front panel without removing the faceplate, allowing the dimmer to be reconfigured if bulb types are changed later.

The dimmer carries an IP20 rating for indoor dry locations and requires an earth terminal connection. It is designed for dimmable lamps only and should not be used with mixed lamp brands or wattages within the same fitting, as this can cause flicker or premature failure.

Specification
Height 85.75 mm
Width 85.75 mm
Projection 7.5 mm
Min. Mounting Box Depth 25mm
Construction Premium grade steel
Finish Brushed Chrome
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

What's the difference between trailing-edge and leading-edge mode?

Trailing-edge mode (pre-set default) works with most dimmable LED bulbs and lower-wattage loads. Leading-edge mode suits older halogen and incandescent lamps, and some higher-wattage LED drivers. Mode switching is done from the front panel using the control knob without removing the faceplate.

Can I mix LED and halogen bulbs on the same gang?

No. Each gang should control a single lamp type only. Mixing lamp technologies or brands on the same circuit can cause flicker, buzzing or uneven dimming. If you need to control different lamp types, use separate gangs or separate dimmers.

What back box depth is required?

A 25mm minimum back box depth is needed. The faceplate projects 7.5mm from the wall once fitted, giving an overall installed depth of approximately 32.5mm from the back of the box to the front of the control caps.

How do I adjust the minimum brightness level?

The dimmer includes a trim function accessible from the front panel. Rotate the control knob to the minimum dim position, then press and hold to adjust the lower threshold until flicker stops. This setting is saved and allows the dimmer to match the minimum dimming capability of your specific bulbs.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 2-gang 2-way intelligent dimmer controls two separate lighting circuits from a single faceplate, handling 10-200W incandescent or halogen loads per gang, or 5-150W LED loads per gang. The dimmer is pre-set in trailing-edge mode and can be switched to leading-edge mode from the front panel using the control knob, making it compatible with most dimmable LED, halogen and incandescent bulbs.

    Designed for residential and light commercial installation in living rooms, bedrooms and dining rooms where two separate lighting zones need independent dimming control from one location, the dimmer fits standard UK 25mm back boxes. Each gang operates via a push on/off action and rotary dimming knob, with the control caps and faceplate finished in brushed chrome with rounded edges. The 2-way wiring allows the same lights to be controlled from two different switch positions.

    The dimmer includes overload and overheat protection, plus an integrated inrush current limiter to handle the initial power draw when LED circuits are switched on. The faceplate is premium-grade steel with a brushed finish that resists fingerprints and sits flush to the wall with 7.5mm projection. Mode switching, trimming adjustments and factory reset are all accessible from the front panel without removing the faceplate, allowing the dimmer to be reconfigured if bulb types are changed later.

    The dimmer carries an IP20 rating for indoor dry locations and requires an earth terminal connection. It is designed for dimmable lamps only and should not be used with mixed lamp brands or wattages within the same fitting, as this can cause flicker or premature failure.

    Specification
    Height 85.75 mm
    Width 85.75 mm
    Projection 7.5 mm
    Min. Mounting Box Depth 25mm
    Construction Premium grade steel
    Finish Brushed Chrome
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    What's the difference between trailing-edge and leading-edge mode?

    Trailing-edge mode (pre-set default) works with most dimmable LED bulbs and lower-wattage loads. Leading-edge mode suits older halogen and incandescent lamps, and some higher-wattage LED drivers. Mode switching is done from the front panel using the control knob without removing the faceplate.

    Can I mix LED and halogen bulbs on the same gang?

    No. Each gang should control a single lamp type only. Mixing lamp technologies or brands on the same circuit can cause flicker, buzzing or uneven dimming. If you need to control different lamp types, use separate gangs or separate dimmers.

    What back box depth is required?

    A 25mm minimum back box depth is needed. The faceplate projects 7.5mm from the wall once fitted, giving an overall installed depth of approximately 32.5mm from the back of the box to the front of the control caps.

    How do I adjust the minimum brightness level?

    The dimmer includes a trim function accessible from the front panel. Rotate the control knob to the minimum dim position, then press and hold to adjust the lower threshold until flicker stops. This setting is saved and allows the dimmer to match the minimum dimming capability of your specific bulbs.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.