Free Delivery on all orders over £99*

18 Way 12V DC 10 Amp CCTV Power Supply - Boxed Distribution Unit

£5899
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The ESP CPS18W is an 18-way 12V DC power distribution unit housed in a lockable metal enclosure, designed to power multiple CCTV cameras, access control panels, or low-voltage security devices from a single mains input. The unit accepts 100-240VAC at 50/60Hz and converts it to 12V DC across 18 individually fused outputs, with a total capacity of 10 amps across all channels.

Each of the 18 outputs carries an automatic resettable PTC (positive temperature coefficient) fuse rated at 1.1A, protecting individual camera runs from short circuits or overload without shutting down the entire system. An internal rocker switch controls mains power to the unit, and individual green LED indicators on the front panel show which outputs are active and drawing current. The front panel also carries AC input and DC output master LED indicators for quick fault diagnosis.

The metal enclosure measures 250mm wide by 215mm high by 68mm deep and mounts via rear keyhole slots or screws through the back plate. Ventilation slots on the door and sides prevent heat build-up during continuous operation. The hinged lockable door allows access to the power supply module and terminal blocks for installation and maintenance, while keeping the live components secure once commissioned. The unit suits commercial CCTV installations, multi-camera domestic systems, and security integrator projects where centralised power distribution reduces cabling complexity and simplifies troubleshooting.

Specification
Product Net Weight 1.64 kg
Product Gross Weight 1.8 kg
Dimensions 68 x 250 x 215 mm
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

How many cameras can this power supply support?

The total capacity is 10 amps across all 18 outputs. A typical IP camera draws 0.3-0.5A, so the unit can support 18 low-power cameras or 10-12 higher-draw models, provided no single output exceeds the 1.1A PTC fuse rating.

What happens if one output overloads?

Each output has an automatic resettable PTC fuse rated at 1.1A. If a camera short-circuits or draws excessive current, that output's PTC fuse trips and isolates the fault. The remaining 17 outputs continue operating. The PTC fuse resets automatically once the fault is cleared and the unit cools.

Can this be mounted outdoors?

The metal enclosure is not IP-rated and is designed for indoor installation in plant rooms, server rooms, or secure cabinets. For outdoor CCTV systems, mount the unit indoors and run 12V DC cable runs to the camera locations.

Is the enclosure lockable?

Yes. The hinged door accepts a padlock or cylinder lock to prevent unauthorised access to the power supply and terminal blocks once the system is commissioned.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

Design help

Not sure what you need?

Our design team can help you plan your lighting, share photos and videos of stock, and send samples worldwide. Book a showroom visit in Birmingham, Hong Kong or Dubai, or ask about our lighting design service.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The ESP CPS18W is an 18-way 12V DC power distribution unit housed in a lockable metal enclosure, designed to power multiple CCTV cameras, access control panels, or low-voltage security devices from a single mains input. The unit accepts 100-240VAC at 50/60Hz and converts it to 12V DC across 18 individually fused outputs, with a total capacity of 10 amps across all channels.

    Each of the 18 outputs carries an automatic resettable PTC (positive temperature coefficient) fuse rated at 1.1A, protecting individual camera runs from short circuits or overload without shutting down the entire system. An internal rocker switch controls mains power to the unit, and individual green LED indicators on the front panel show which outputs are active and drawing current. The front panel also carries AC input and DC output master LED indicators for quick fault diagnosis.

    The metal enclosure measures 250mm wide by 215mm high by 68mm deep and mounts via rear keyhole slots or screws through the back plate. Ventilation slots on the door and sides prevent heat build-up during continuous operation. The hinged lockable door allows access to the power supply module and terminal blocks for installation and maintenance, while keeping the live components secure once commissioned. The unit suits commercial CCTV installations, multi-camera domestic systems, and security integrator projects where centralised power distribution reduces cabling complexity and simplifies troubleshooting.

    Specification
    Product Net Weight 1.64 kg
    Product Gross Weight 1.8 kg
    Dimensions 68 x 250 x 215 mm
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    How many cameras can this power supply support?

    The total capacity is 10 amps across all 18 outputs. A typical IP camera draws 0.3-0.5A, so the unit can support 18 low-power cameras or 10-12 higher-draw models, provided no single output exceeds the 1.1A PTC fuse rating.

    What happens if one output overloads?

    Each output has an automatic resettable PTC fuse rated at 1.1A. If a camera short-circuits or draws excessive current, that output's PTC fuse trips and isolates the fault. The remaining 17 outputs continue operating. The PTC fuse resets automatically once the fault is cleared and the unit cools.

    Can this be mounted outdoors?

    The metal enclosure is not IP-rated and is designed for indoor installation in plant rooms, server rooms, or secure cabinets. For outdoor CCTV systems, mount the unit indoors and run 12V DC cable runs to the camera locations.

    Is the enclosure lockable?

    Yes. The hinged door accepts a padlock or cylinder lock to prevent unauthorised access to the power supply and terminal blocks once the system is commissioned.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.