Free Delivery on all orders over £99*

12V/24V RF Controller & Touch Remote - RGB LED Flex

£2899
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge LEDFRA9 is a 12V/24V RF controller for RGB LED flex strip installations, supplied with a wireless touch panel remote. The controller outputs up to 216W at 12V or 432W at 24V across three channels (R/G/B), allowing control of up to 18A total current depending on voltage. The touch remote operates via RF signal with a detection range of up to 20 metres through walls and ceilings.

Designed for domestic and light commercial RGB LED flex installations, the controller sits between the 12V or 24V DC power supply and the LED strip run, handling colour mixing, brightness dimming and dynamic RGB transitions. The touch panel remote features an on/off toggle, colour wheel for direct colour selection, and brightness controls. The controller supports smooth colour transitions between programmed scenes and fade effects.

The controller measures 84mm wide by 81mm long by 32mm high and mounts to a wall or inside a ceiling void using the two slotted mounting tabs on the base. The pressed steel and polycarbonate housing carries an IP20 rating, suitable for dry indoor locations only. The remote requires three AAA batteries (not included) and uses a low-power RF transmitter that does not require line-of-sight to the controller. The controller accepts input via screw terminals marked DC+ and DC-, and outputs via three channels marked R/CH1, G/CH2, B/CH3 plus a common V+ terminal.

Specification
Length 81 mm
Height 32 mm
Width 84 mm
Construction Pressed steel
Construction 2 & polycarbonate
Finish Black
Class III
IP Rating IP20
Primary Voltage 12/24V
Warranty 1
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What is the maximum LED strip length this controller can handle?

At 12V the controller outputs a maximum of 216W, which supports approximately 18A of total current across the three RGB channels. At 24V the maximum output is 432W. The actual strip length depends on the power consumption per metre of your specific LED flex product.

Does the remote require line-of-sight to the controller?

No. The remote uses an RF (radio frequency) signal rather than infrared, so it works through walls, ceilings and furniture within a 20-metre range. The controller does not need to be visible from the remote position.

Can multiple controllers be paired to one remote?

The product manual details pairing procedures. Some Knightsbridge RF controllers support multi-zone control, but this depends on the specific model and firmware. Refer to the manual linked in the Downloads tab above for the LEDFRA9's pairing capabilities.

What batteries does the remote take?

The touch panel remote requires three AAA batteries, which are not included in the box. Standard alkaline or rechargeable NiMH AAA cells both work.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge LEDFRA9 is a 12V/24V RF controller for RGB LED flex strip installations, supplied with a wireless touch panel remote. The controller outputs up to 216W at 12V or 432W at 24V across three channels (R/G/B), allowing control of up to 18A total current depending on voltage. The touch remote operates via RF signal with a detection range of up to 20 metres through walls and ceilings.

    Designed for domestic and light commercial RGB LED flex installations, the controller sits between the 12V or 24V DC power supply and the LED strip run, handling colour mixing, brightness dimming and dynamic RGB transitions. The touch panel remote features an on/off toggle, colour wheel for direct colour selection, and brightness controls. The controller supports smooth colour transitions between programmed scenes and fade effects.

    The controller measures 84mm wide by 81mm long by 32mm high and mounts to a wall or inside a ceiling void using the two slotted mounting tabs on the base. The pressed steel and polycarbonate housing carries an IP20 rating, suitable for dry indoor locations only. The remote requires three AAA batteries (not included) and uses a low-power RF transmitter that does not require line-of-sight to the controller. The controller accepts input via screw terminals marked DC+ and DC-, and outputs via three channels marked R/CH1, G/CH2, B/CH3 plus a common V+ terminal.

    Specification
    Length 81 mm
    Height 32 mm
    Width 84 mm
    Construction Pressed steel
    Construction 2 & polycarbonate
    Finish Black
    Class III
    IP Rating IP20
    Primary Voltage 12/24V
    Warranty 1
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What is the maximum LED strip length this controller can handle?

    At 12V the controller outputs a maximum of 216W, which supports approximately 18A of total current across the three RGB channels. At 24V the maximum output is 432W. The actual strip length depends on the power consumption per metre of your specific LED flex product.

    Does the remote require line-of-sight to the controller?

    No. The remote uses an RF (radio frequency) signal rather than infrared, so it works through walls, ceilings and furniture within a 20-metre range. The controller does not need to be visible from the remote position.

    Can multiple controllers be paired to one remote?

    The product manual details pairing procedures. Some Knightsbridge RF controllers support multi-zone control, but this depends on the specific model and firmware. Refer to the manual linked in the Downloads tab above for the LEDFRA9's pairing capabilities.

    What batteries does the remote take?

    The touch panel remote requires three AAA batteries, which are not included in the box. Standard alkaline or rechargeable NiMH AAA cells both work.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.