Free Delivery on all orders over £99*

12V/24V RF Controller & Touch Remote Dimmer - Single Colour LED

£2899
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge LEDFRA7 is an RF wireless dimmer controller for single-colour 12V or 24V LED strip installations, supplied with a touch-panel remote that controls brightness levels from up to 20 metres away. The controller sits inline between the LED driver and the strip, receiving wireless signals from the remote to adjust output intensity from 0-100%.

Designed for under-cabinet lighting, cove lighting, display cases and architectural strip installations where physical wall switches are impractical, the controller allows dimming control without running additional cable runs back to a fixed dimmer position. The touch remote features an on/off toggle, brightness up/down controls, and preset brightness memory. The RF signal works through walls and furniture, so the remote does not require line-of-sight to the controller unit.

The controller handles loads up to 216W at 12V or 432W at 24V, supporting typical residential LED strip runs of 10-15 metres depending on the strip's wattage per metre. The pressed steel housing measures 84mm x 81mm x 32mm and fixes to surfaces via two mounting slots on the base plate. The unit carries an IP20 rating, suitable for dry indoor locations only. The remote requires three AAA batteries (not included).

Specification
Length 81 mm
Height 32 mm
Width 84 mm
Construction Pressed steel
Construction 2 & polycarbonate
Finish Black
Class III
IP Rating IP20
Primary Voltage 12/24V
Warranty 1
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What's the maximum LED strip length this can control?

The controller handles up to 216W at 12V or 432W at 24V. A typical 12V LED strip at 14.4W per metre can run approximately 15 metres through this controller. Higher-wattage strips reduce the maximum length proportionally.

Does the remote need line-of-sight to the controller?

No. The RF signal works through walls, cabinet panels and furniture within the 20-metre detection range. The controller does not need to be visible from the remote position.

Can multiple remotes control one controller?

The controller can be paired with additional remotes of the same type, allowing control from multiple locations. See the product manual for pairing instructions.

Is this suitable for bathroom installations?

No. The IP20 rating means the controller is designed for dry indoor locations only. For bathrooms or wet environments, an IP65-rated controller is required.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge LEDFRA7 is an RF wireless dimmer controller for single-colour 12V or 24V LED strip installations, supplied with a touch-panel remote that controls brightness levels from up to 20 metres away. The controller sits inline between the LED driver and the strip, receiving wireless signals from the remote to adjust output intensity from 0-100%.

    Designed for under-cabinet lighting, cove lighting, display cases and architectural strip installations where physical wall switches are impractical, the controller allows dimming control without running additional cable runs back to a fixed dimmer position. The touch remote features an on/off toggle, brightness up/down controls, and preset brightness memory. The RF signal works through walls and furniture, so the remote does not require line-of-sight to the controller unit.

    The controller handles loads up to 216W at 12V or 432W at 24V, supporting typical residential LED strip runs of 10-15 metres depending on the strip's wattage per metre. The pressed steel housing measures 84mm x 81mm x 32mm and fixes to surfaces via two mounting slots on the base plate. The unit carries an IP20 rating, suitable for dry indoor locations only. The remote requires three AAA batteries (not included).

    Specification
    Length 81 mm
    Height 32 mm
    Width 84 mm
    Construction Pressed steel
    Construction 2 & polycarbonate
    Finish Black
    Class III
    IP Rating IP20
    Primary Voltage 12/24V
    Warranty 1
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What's the maximum LED strip length this can control?

    The controller handles up to 216W at 12V or 432W at 24V. A typical 12V LED strip at 14.4W per metre can run approximately 15 metres through this controller. Higher-wattage strips reduce the maximum length proportionally.

    Does the remote need line-of-sight to the controller?

    No. The RF signal works through walls, cabinet panels and furniture within the 20-metre detection range. The controller does not need to be visible from the remote position.

    Can multiple remotes control one controller?

    The controller can be paired with additional remotes of the same type, allowing control from multiple locations. See the product manual for pairing instructions.

    Is this suitable for bathroom installations?

    No. The IP20 rating means the controller is designed for dry indoor locations only. For bathrooms or wet environments, an IP65-rated controller is required.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.