Free Delivery on all orders over £99*

12V/24V LED Strip to Strip Connector - Single Colour 8mm

£299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This Knightsbridge strip-to-strip connector joins two lengths of 8mm single-colour LED flex without soldering. The polycarbonate housing measures 24mm x 12mm x 7mm and uses a clip mechanism on each end to lock onto the copper pads of the flex strip, establishing electrical contact for both 12V and 24V low-voltage systems.

Designed for indoor accent lighting installations where LED flex runs need to turn corners, span gaps, or extend beyond a single 5m reel, the connector maintains power continuity across the join. The IP20 rating limits use to dry interior locations such as under-cabinet lighting in kitchens, shelf lighting in retail display units, cove lighting in living rooms, and architectural accent strips in hallways or staircases.

The black polycarbonate finish sits flush against the back of the LED strip once clipped, keeping the connector low-profile when the installation is viewed from the front. Class III construction means the connector operates safely at extra-low voltage with no risk of mains electric contact. The clip design allows the connector to be removed and repositioned during testing or reconfiguration without damaging the flex strip, provided the copper contact pads remain clean.

Specification
Length 24 mm
Width 12 mm
Projection 7 mm
Construction Polycarbonate
Finish Black
Class III
IP Rating IP20
Primary Voltage 12/24V
Warranty 1
Downloads

Product Specification Sheet

Frequently Asked

Does this work with RGB or colour-changing LED strip?

No. This connector is designed only for single-colour LED flex with two copper contact pads. RGB and RGBW strips require 4-pin or 5-pin connectors to carry the separate colour channels.

Is soldering required?

No. The connector uses a clip mechanism that presses internal contact pins onto the copper pads of the LED strip. Ensure the copper pads are clean and free from oxidation before clipping the connector into place.

Can it be used outdoors?

No. The IP20 rating means the connector is not protected against moisture ingress and must only be used in dry indoor locations. Outdoor or bathroom installations require IP65 or IP67 rated connectors and matching flex.

What width of LED strip does it fit?

The connector is sized for 8mm-wide single-colour LED flex. It will not fit 10mm-wide strips or narrow 5mm variants. Check the strip width specification before ordering.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This Knightsbridge strip-to-strip connector joins two lengths of 8mm single-colour LED flex without soldering. The polycarbonate housing measures 24mm x 12mm x 7mm and uses a clip mechanism on each end to lock onto the copper pads of the flex strip, establishing electrical contact for both 12V and 24V low-voltage systems.

    Designed for indoor accent lighting installations where LED flex runs need to turn corners, span gaps, or extend beyond a single 5m reel, the connector maintains power continuity across the join. The IP20 rating limits use to dry interior locations such as under-cabinet lighting in kitchens, shelf lighting in retail display units, cove lighting in living rooms, and architectural accent strips in hallways or staircases.

    The black polycarbonate finish sits flush against the back of the LED strip once clipped, keeping the connector low-profile when the installation is viewed from the front. Class III construction means the connector operates safely at extra-low voltage with no risk of mains electric contact. The clip design allows the connector to be removed and repositioned during testing or reconfiguration without damaging the flex strip, provided the copper contact pads remain clean.

    Specification
    Length 24 mm
    Width 12 mm
    Projection 7 mm
    Construction Polycarbonate
    Finish Black
    Class III
    IP Rating IP20
    Primary Voltage 12/24V
    Warranty 1
    Downloads

    Product Specification Sheet

    Frequently Asked

    Does this work with RGB or colour-changing LED strip?

    No. This connector is designed only for single-colour LED flex with two copper contact pads. RGB and RGBW strips require 4-pin or 5-pin connectors to carry the separate colour channels.

    Is soldering required?

    No. The connector uses a clip mechanism that presses internal contact pins onto the copper pads of the LED strip. Ensure the copper pads are clean and free from oxidation before clipping the connector into place.

    Can it be used outdoors?

    No. The IP20 rating means the connector is not protected against moisture ingress and must only be used in dry indoor locations. Outdoor or bathroom installations require IP65 or IP67 rated connectors and matching flex.

    What width of LED strip does it fit?

    The connector is sized for 8mm-wide single-colour LED flex. It will not fit 10mm-wide strips or narrow 5mm variants. Check the strip width specification before ordering.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.