Free Delivery on all orders over £99*

12V/24V LED Strip to Strip Connector - 8mm Single Colour

£199
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This Knightsbridge strip-to-strip connector joins two lengths of 8mm single-colour LED flex without soldering, using a click-fit mechanism on each end of a 150mm cable. The connector accepts 12V or 24V DC LED strip and maintains continuity across the join, allowing continuous runs where a gap or corner requires two separate strip sections to be linked.

Designed for interior installations where LED flex needs to turn a corner, bridge a gap between cabinets, or connect two reels into a longer run, the connector fits 8mm-wide single-colour LED flex only (not suitable for RGB or dual-white strip). The 150mm cable length between the two clips provides enough slack to route the connection behind a pelmet, inside a cabinet frame, or along the back of a display shelf without visible strain on the strip.

The polycarbonate housing measures 132mm long overall with an 11mm width and 4.5mm projection from the strip surface once clipped in place. The IP20 rating suits dry interior use in living rooms, kitchens, retail displays, and office accent lighting. The black finish blends into the gap between LED sections and stays discrete against dark surfaces or behind diffusers.

Specification
Length 132 mm
Width 11 mm
Projection 4.5 mm
Construction Polycarbonate
Finish Black
Class III
IP Rating IP20
Primary Voltage 12/24V
Warranty 1
Downloads

Product Specification Sheet

Frequently Asked

What width LED strip does this fit?

This connector is designed for 8mm-wide single-colour LED flex only. It will not fit 10mm or 12mm strip, and it is not compatible with RGB or dual-white LED flex that requires more than two conductors.

Does it require soldering?

No. The connector uses a click-fit mechanism at each end. The LED strip slides into the clip and locks in place, making contact with the internal conductors without any soldering or crimping.

Can it be used outdoors?

No. The IP20 rating means the connector is suitable for dry interior locations only. For outdoor or damp environments, an IP65 or IP67-rated connector is required.

What is the 150mm cable for?

The 150mm cable between the two clips allows the connector to bridge a gap, turn a corner, or link two sections of LED strip where a direct join is not possible. This length provides routing flexibility without visible strain on the strip.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This Knightsbridge strip-to-strip connector joins two lengths of 8mm single-colour LED flex without soldering, using a click-fit mechanism on each end of a 150mm cable. The connector accepts 12V or 24V DC LED strip and maintains continuity across the join, allowing continuous runs where a gap or corner requires two separate strip sections to be linked.

    Designed for interior installations where LED flex needs to turn a corner, bridge a gap between cabinets, or connect two reels into a longer run, the connector fits 8mm-wide single-colour LED flex only (not suitable for RGB or dual-white strip). The 150mm cable length between the two clips provides enough slack to route the connection behind a pelmet, inside a cabinet frame, or along the back of a display shelf without visible strain on the strip.

    The polycarbonate housing measures 132mm long overall with an 11mm width and 4.5mm projection from the strip surface once clipped in place. The IP20 rating suits dry interior use in living rooms, kitchens, retail displays, and office accent lighting. The black finish blends into the gap between LED sections and stays discrete against dark surfaces or behind diffusers.

    Specification
    Length 132 mm
    Width 11 mm
    Projection 4.5 mm
    Construction Polycarbonate
    Finish Black
    Class III
    IP Rating IP20
    Primary Voltage 12/24V
    Warranty 1
    Downloads

    Product Specification Sheet

    Frequently Asked

    What width LED strip does this fit?

    This connector is designed for 8mm-wide single-colour LED flex only. It will not fit 10mm or 12mm strip, and it is not compatible with RGB or dual-white LED flex that requires more than two conductors.

    Does it require soldering?

    No. The connector uses a click-fit mechanism at each end. The LED strip slides into the clip and locks in place, making contact with the internal conductors without any soldering or crimping.

    Can it be used outdoors?

    No. The IP20 rating means the connector is suitable for dry interior locations only. For outdoor or damp environments, an IP65 or IP67-rated connector is required.

    What is the 150mm cable for?

    The 150mm cable between the two clips allows the connector to bridge a gap, turn a corner, or link two sections of LED strip where a direct join is not possible. This length provides routing flexibility without visible strain on the strip.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.