Free Delivery on all orders over £99*

12V/24V LED Flex Wire-to-Strip Connector - Single Colour 8mm

£299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This Knightsbridge wire-to-strip connector joins a power cable to single-colour 8mm LED flex without soldering or terminal blocks. The polycarbonate housing accepts the flex on one side and a pair of power wires on the other, using a click-lock mechanism to secure both and establish electrical contact through internal spring-loaded pins.

Designed for 12V or 24V DC low-voltage LED strip installations in cabinets, shelving, display cases and cove lighting, the connector allows power cables to be run to the strip without cutting or stripping the flex's copper tracks. The IP20 rating restricts use to dry indoor locations. The 19mm x 12mm x 7mm housing sits flat against the strip, minimising projection where the strip is mounted in narrow channels or under-cabinet recesses.

The black polycarbonate finish blends into most installation environments where the connector will be visible. The Class III rating confirms the connector is suitable only for extra-low-voltage circuits below 50V AC or 120V DC. Installation requires no tools — the flex and wires push into their respective openings and the housing clicks shut to hold them in place.

Specification
Length 19 mm
Width 12 mm
Projection 7 mm
Construction Polycarbonate
Finish Black
Class III
IP Rating IP20
Primary Voltage 12/24V
Warranty 1
Downloads

Product Specification Sheet

Frequently Asked

What width of LED strip does it fit?

This connector is designed for 8mm-wide single-colour LED flex. It will not fit wider 10mm RGB strips or narrower 5mm variants. Check your strip's width before ordering.

Can it be used outdoors or in bathrooms?

No. The IP20 rating means the connector is suitable only for dry indoor locations with no exposure to moisture or dust ingress. For wet or damp environments an IP65 or IP67 connector is required.

Does it work with both 12V and 24V strips?

Yes. The connector is compatible with both 12V and 24V DC LED flex. Ensure the voltage of your power supply matches the voltage rating of your strip — the connector itself does not convert voltage.

Is soldering required?

No. The connector uses a tool-free click-lock mechanism. The LED flex and power wires push into their respective openings and the housing clicks shut to establish contact through internal spring pins.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This Knightsbridge wire-to-strip connector joins a power cable to single-colour 8mm LED flex without soldering or terminal blocks. The polycarbonate housing accepts the flex on one side and a pair of power wires on the other, using a click-lock mechanism to secure both and establish electrical contact through internal spring-loaded pins.

    Designed for 12V or 24V DC low-voltage LED strip installations in cabinets, shelving, display cases and cove lighting, the connector allows power cables to be run to the strip without cutting or stripping the flex's copper tracks. The IP20 rating restricts use to dry indoor locations. The 19mm x 12mm x 7mm housing sits flat against the strip, minimising projection where the strip is mounted in narrow channels or under-cabinet recesses.

    The black polycarbonate finish blends into most installation environments where the connector will be visible. The Class III rating confirms the connector is suitable only for extra-low-voltage circuits below 50V AC or 120V DC. Installation requires no tools — the flex and wires push into their respective openings and the housing clicks shut to hold them in place.

    Specification
    Length 19 mm
    Width 12 mm
    Projection 7 mm
    Construction Polycarbonate
    Finish Black
    Class III
    IP Rating IP20
    Primary Voltage 12/24V
    Warranty 1
    Downloads

    Product Specification Sheet

    Frequently Asked

    What width of LED strip does it fit?

    This connector is designed for 8mm-wide single-colour LED flex. It will not fit wider 10mm RGB strips or narrower 5mm variants. Check your strip's width before ordering.

    Can it be used outdoors or in bathrooms?

    No. The IP20 rating means the connector is suitable only for dry indoor locations with no exposure to moisture or dust ingress. For wet or damp environments an IP65 or IP67 connector is required.

    Does it work with both 12V and 24V strips?

    Yes. The connector is compatible with both 12V and 24V DC LED flex. Ensure the voltage of your power supply matches the voltage rating of your strip — the connector itself does not convert voltage.

    Is soldering required?

    No. The connector uses a tool-free click-lock mechanism. The LED flex and power wires push into their respective openings and the housing clicks shut to establish contact through internal spring pins.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.