Free Delivery on all orders over £99*

12V/24V LED Flex Strip-to-Strip Connector - RGB/CCT 10mm

£599
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge LFCON4FX is a strip-to-strip connector designed for joining 10mm RGB or CCT LED flex strips without soldering. The connector uses a snap-fit polycarbonate housing with a 150mm cable bridge between two terminal blocks, each accepting one LED strip end. Once clicked in place, the connector maintains electrical continuity for power and data signals, enabling RGB colour sequences or CCT tunable-white transitions to run uninterrupted across multiple strip sections.

Designed for architectural lighting installations, under-cabinet runs, cove lighting and display lighting where multiple LED strip reels need to be joined mid-run, the connector handles both 12V and 24V DC supplies. The IP20 rating suits dry indoor locations only — it is not rated for bathrooms, outdoor use or contact with moisture. The black polycarbonate shell measures 14mm wide and 7mm in profile, allowing it to sit flush against most ceiling or cabinet recesses without visible projection.

The snap-fit terminal blocks grip the copper pads on the end of each LED strip section, eliminating the need for screw terminals or soldered joints. This means a strip-to-strip joint can be assembled on-site in under 60 seconds once the strip ends are cut and prepared. The 150mm cable length provides enough slack to route the connector behind a trim piece or inside a channel without tension on the strip ends.

Specification
Length 190 mm
Width 14 mm
Projection 7 mm
Construction Polycarbonate
Finish Black
Class III
IP Rating IP20
Primary Voltage 12/24V
Warranty 1
Downloads

Product Specification Sheet

Frequently Asked

What LED strips is this compatible with?

The connector is designed for 10mm wide RGB or CCT LED flex strips operating on 12V or 24V DC. It fits Knightsbridge's LFC24xx series and other 10mm strips with matching copper pad layouts. Confirm pad alignment before ordering if using third-party strips.

Can it be used outdoors or in bathrooms?

No. The IP20 rating means the connector is only suitable for dry indoor locations. It is not rated for contact with moisture, steam or outdoor weather exposure.

Does it require soldering?

No. The connector uses a snap-fit terminal block design that grips the copper pads on each LED strip end without soldering, screw terminals or additional tools.

What is the cable length between the two connectors?

The cable bridge measures 150mm between the two terminal blocks, providing enough slack to route the connector behind trim or inside an aluminium channel without tension on the strip ends.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge LFCON4FX is a strip-to-strip connector designed for joining 10mm RGB or CCT LED flex strips without soldering. The connector uses a snap-fit polycarbonate housing with a 150mm cable bridge between two terminal blocks, each accepting one LED strip end. Once clicked in place, the connector maintains electrical continuity for power and data signals, enabling RGB colour sequences or CCT tunable-white transitions to run uninterrupted across multiple strip sections.

    Designed for architectural lighting installations, under-cabinet runs, cove lighting and display lighting where multiple LED strip reels need to be joined mid-run, the connector handles both 12V and 24V DC supplies. The IP20 rating suits dry indoor locations only — it is not rated for bathrooms, outdoor use or contact with moisture. The black polycarbonate shell measures 14mm wide and 7mm in profile, allowing it to sit flush against most ceiling or cabinet recesses without visible projection.

    The snap-fit terminal blocks grip the copper pads on the end of each LED strip section, eliminating the need for screw terminals or soldered joints. This means a strip-to-strip joint can be assembled on-site in under 60 seconds once the strip ends are cut and prepared. The 150mm cable length provides enough slack to route the connector behind a trim piece or inside a channel without tension on the strip ends.

    Specification
    Length 190 mm
    Width 14 mm
    Projection 7 mm
    Construction Polycarbonate
    Finish Black
    Class III
    IP Rating IP20
    Primary Voltage 12/24V
    Warranty 1
    Downloads

    Product Specification Sheet

    Frequently Asked

    What LED strips is this compatible with?

    The connector is designed for 10mm wide RGB or CCT LED flex strips operating on 12V or 24V DC. It fits Knightsbridge's LFC24xx series and other 10mm strips with matching copper pad layouts. Confirm pad alignment before ordering if using third-party strips.

    Can it be used outdoors or in bathrooms?

    No. The IP20 rating means the connector is only suitable for dry indoor locations. It is not rated for contact with moisture, steam or outdoor weather exposure.

    Does it require soldering?

    No. The connector uses a snap-fit terminal block design that grips the copper pads on each LED strip end without soldering, screw terminals or additional tools.

    What is the cable length between the two connectors?

    The cable bridge measures 150mm between the two terminal blocks, providing enough slack to route the connector behind trim or inside an aluminium channel without tension on the strip ends.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.