Free Delivery on all orders over £99*

12V/24V LED Flex Strip to Strip 150mm Connector - Single Colour 8mm

£499
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

This Knightsbridge strip-to-strip connector joins two sections of 8mm single-colour LED flex with a 150mm cable bridge, rated for 12V or 24V low-voltage installations. The connector uses a tool-free click mechanism that grips the copper contact pads on the flex strip without soldering, cutting or stripping wires.

Designed for extending LED flex runs in under-cabinet lighting, cove lighting, shelving accent lighting and retail display installations where a continuous run needs to navigate corners or span gaps between fixed sections. The 150mm cable length allows the connector to bridge around obstacles, route through narrow gaps behind furniture, or transition between surfaces without pulling tension on the flex itself.

The black polycarbonate housing measures 190mm total length including both clip connectors, 12mm wide and 7mm deep, keeping the assembly low-profile enough to fit within typical LED channel profiles. The IP20 rating restricts use to dry indoor environments only. The connector maintains full electrical continuity across the join, preventing voltage drop or flickering between strip sections when correctly seated.

Specification
Length 190 mm
Width 12 mm
Projection 7 mm
Construction Polycarbonate
Finish Black
Class III
IP Rating IP20
Primary Voltage 12/24V
Warranty 1
Downloads

Product Specification Sheet

Frequently Asked

What width LED flex does this fit?

This connector is designed for 8mm-wide single-colour LED flex only. It will not fit RGB, RGBW or dual-white flex strips, which use different contact pad configurations.

Does it require soldering?

No. The connector uses a spring-loaded clip mechanism that grips the copper contact pads on the flex strip when the cover is closed. No tools, soldering or wire stripping are needed.

Can it be used outdoors?

No. The IP20 rating means the connector is not sealed against moisture or dust ingress and must only be used in dry indoor locations.

How much current can it handle?

The connector is rated for Class III low-voltage installations at 12V or 24V. Maximum current capacity depends on the gauge of the internal wiring and the contact surface area — consult the datasheet linked above for exact current ratings if running high-density LED flex.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    This Knightsbridge strip-to-strip connector joins two sections of 8mm single-colour LED flex with a 150mm cable bridge, rated for 12V or 24V low-voltage installations. The connector uses a tool-free click mechanism that grips the copper contact pads on the flex strip without soldering, cutting or stripping wires.

    Designed for extending LED flex runs in under-cabinet lighting, cove lighting, shelving accent lighting and retail display installations where a continuous run needs to navigate corners or span gaps between fixed sections. The 150mm cable length allows the connector to bridge around obstacles, route through narrow gaps behind furniture, or transition between surfaces without pulling tension on the flex itself.

    The black polycarbonate housing measures 190mm total length including both clip connectors, 12mm wide and 7mm deep, keeping the assembly low-profile enough to fit within typical LED channel profiles. The IP20 rating restricts use to dry indoor environments only. The connector maintains full electrical continuity across the join, preventing voltage drop or flickering between strip sections when correctly seated.

    Specification
    Length 190 mm
    Width 12 mm
    Projection 7 mm
    Construction Polycarbonate
    Finish Black
    Class III
    IP Rating IP20
    Primary Voltage 12/24V
    Warranty 1
    Downloads

    Product Specification Sheet

    Frequently Asked

    What width LED flex does this fit?

    This connector is designed for 8mm-wide single-colour LED flex only. It will not fit RGB, RGBW or dual-white flex strips, which use different contact pad configurations.

    Does it require soldering?

    No. The connector uses a spring-loaded clip mechanism that grips the copper contact pads on the flex strip when the cover is closed. No tools, soldering or wire stripping are needed.

    Can it be used outdoors?

    No. The IP20 rating means the connector is not sealed against moisture or dust ingress and must only be used in dry indoor locations.

    How much current can it handle?

    The connector is rated for Class III low-voltage installations at 12V or 24V. Maximum current capacity depends on the gauge of the internal wiring and the contact surface area — consult the datasheet linked above for exact current ratings if running high-density LED flex.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.