Free Delivery on all orders over £99*

10AX Intermediate Switch - White Rounded Edge

£299
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 10AX intermediate switch provides three-or-more-point control of a lighting circuit, allowing a single set of lights to be switched on or off from three different locations. The 86mm square plate has gently rounded edges and a white thermoset resin finish with an anti-microbial coating tested to ISO 22196:2011, making it well-suited to hallways, stairwells and other high-traffic circulation spaces.

An intermediate switch is wired between two two-way switches in a three-way lighting circuit. It functions as the middle switching point in arrangements where lights need to be controlled from a landing, top of stairs and bottom of stairs, or from either end of a long hallway plus a midpoint. The 10AX rating handles lighting loads up to 2,300W at 230V, suitable for most domestic and light commercial lighting circuits.

The 7mm projection from the wall gives a low-profile presence, and the rounded edges reduce the sharp corner feel of traditional square plates. The plate includes screw cap covers that hide the fixing screws once installation is complete. The switch requires a minimum 16mm back box depth and is certified to EN 60669-1 for electrical safety. Knightsbridge backs this range with a 25-year warranty.

Specification
Height 86 mm
Width 86 mm
Projection 7 mm
Min. Mounting Box Depth 16mm
Construction Thermoset resin
Finish White
IP Rating IP20
Primary Voltage 230V 50Hz
Anti-Microbial Properties 3rd Party Tested to ISO 22196:2011
Warranty 25
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What is an intermediate switch used for?

An intermediate switch allows a lighting circuit to be controlled from three or more locations. It is wired between two two-way switches, creating a three-way circuit. This is common in stairwells where you need switches at the top, bottom and landing, or in long hallways with switches at both ends and a midpoint.

What back box depth is required?

A minimum 16mm back box depth is needed. The 7mm plate projection means the total depth from wall to front of plate is approximately 23mm once installed.

What does the anti-microbial coating do?

The plate surface is treated with an anti-microbial coating tested to ISO 22196:2011. This reduces bacterial growth on the switch surface, which is useful in high-traffic areas like hallways and stairwells where multiple people touch the same switch daily.

Can this be used with LED lighting?

Yes. The 10AX rating supports loads up to 2,300W at 230V, which covers most LED, halogen and incandescent lighting circuits. The switch is a mechanical contact switch and does not interfere with LED dimming circuits when used in non-dimmed applications.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 10AX intermediate switch provides three-or-more-point control of a lighting circuit, allowing a single set of lights to be switched on or off from three different locations. The 86mm square plate has gently rounded edges and a white thermoset resin finish with an anti-microbial coating tested to ISO 22196:2011, making it well-suited to hallways, stairwells and other high-traffic circulation spaces.

    An intermediate switch is wired between two two-way switches in a three-way lighting circuit. It functions as the middle switching point in arrangements where lights need to be controlled from a landing, top of stairs and bottom of stairs, or from either end of a long hallway plus a midpoint. The 10AX rating handles lighting loads up to 2,300W at 230V, suitable for most domestic and light commercial lighting circuits.

    The 7mm projection from the wall gives a low-profile presence, and the rounded edges reduce the sharp corner feel of traditional square plates. The plate includes screw cap covers that hide the fixing screws once installation is complete. The switch requires a minimum 16mm back box depth and is certified to EN 60669-1 for electrical safety. Knightsbridge backs this range with a 25-year warranty.

    Specification
    Height 86 mm
    Width 86 mm
    Projection 7 mm
    Min. Mounting Box Depth 16mm
    Construction Thermoset resin
    Finish White
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Anti-Microbial Properties 3rd Party Tested to ISO 22196:2011
    Warranty 25
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What is an intermediate switch used for?

    An intermediate switch allows a lighting circuit to be controlled from three or more locations. It is wired between two two-way switches, creating a three-way circuit. This is common in stairwells where you need switches at the top, bottom and landing, or in long hallways with switches at both ends and a midpoint.

    What back box depth is required?

    A minimum 16mm back box depth is needed. The 7mm plate projection means the total depth from wall to front of plate is approximately 23mm once installed.

    What does the anti-microbial coating do?

    The plate surface is treated with an anti-microbial coating tested to ISO 22196:2011. This reduces bacterial growth on the switch surface, which is useful in high-traffic areas like hallways and stairwells where multiple people touch the same switch daily.

    Can this be used with LED lighting?

    Yes. The 10AX rating supports loads up to 2,300W at 230V, which covers most LED, halogen and incandescent lighting circuits. The switch is a mechanical contact switch and does not interfere with LED dimming circuits when used in non-dimmed applications.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.