Free Delivery on all orders over £99*

10AX 3 Gang 2-Way Switch - Matt Black Screwless

£1099
The RRP is the manufacturer's recommended retail price of the item.
Limited Stock
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge 10AX 3-gang 2-way switch controls three independent lighting circuits behind a matt black screwless faceplate with matching metal rockers. The 10AX rating handles circuit loads up to 2,300W per gang, suitable for standard domestic lighting, spotlights and LED driver circuits on 230V mains. The 2-way configuration allows each gang to be wired with a partner switch at a different location, giving two-point control over each lighting zone.

Designed for residential, hospitality and commercial installations where clean wall finishes matter, the switch uses a screwless cover plate that clips onto a separate metal sub-frame fixed to the back box. Once installed, no visible screws or fixings appear on the wall. The 4.3mm projection from the wall gives a low-profile finish that sits nearly flush with the surface, reducing the visual weight of the switch compared to deeper-set traditional plates.

The faceplate is stamped from premium-grade steel with a powder-coated matt black finish that resists fingerprints and provides a soft, non-reflective surface. The metal rockers match the faceplate finish, creating a monochromatic appearance that pairs with industrial, minimalist and contemporary interiors. A built-in gasket behind the faceplate edge provides IP20 dust ingress protection. The switch requires a minimum 16mm back box depth and is certified to EN 60669-1.

Specification
Height 87.5 mm
Width 87.5 mm
Projection 4.3 mm
Min. Mounting Box Depth 16mm
Construction Premium grade steel
Finish Matt Black
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Warranty 25
Downloads

Product Specification Sheet

Product Manual

Frequently Asked

What does 2-way switching mean?

2-way switching allows each gang to be controlled from two different switch locations. This is standard for staircases, hallways and rooms with two entrances, where you need to turn the same light on or off from either end. Each gang operates independently as a 2-way switch.

What back box depth is required?

A minimum 16mm back box depth is needed. This shallow requirement makes the switch suitable for dry-lining installations where deeper boxes cannot be accommodated. The screwless cover plate adds 4.3mm projection from the wall once fitted.

Is the screwless plate removable for redecorating?

Yes. The cover plate clips onto a separate metal sub-frame that is screwed to the back box. The cover can be removed for painting around the switch and re-clipped without disturbing the wiring.

What other finishes are available in this range?

Knightsbridge produces this 3-gang 2-way switch in polished chrome, brushed chrome, polished brass, antique brass, white and other finishes. Use the search function or filters at Niori to find other variants in stock.

Shipping & Returns

Free worldwide delivery

Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

Returns

30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge 10AX 3-gang 2-way switch controls three independent lighting circuits behind a matt black screwless faceplate with matching metal rockers. The 10AX rating handles circuit loads up to 2,300W per gang, suitable for standard domestic lighting, spotlights and LED driver circuits on 230V mains. The 2-way configuration allows each gang to be wired with a partner switch at a different location, giving two-point control over each lighting zone.

    Designed for residential, hospitality and commercial installations where clean wall finishes matter, the switch uses a screwless cover plate that clips onto a separate metal sub-frame fixed to the back box. Once installed, no visible screws or fixings appear on the wall. The 4.3mm projection from the wall gives a low-profile finish that sits nearly flush with the surface, reducing the visual weight of the switch compared to deeper-set traditional plates.

    The faceplate is stamped from premium-grade steel with a powder-coated matt black finish that resists fingerprints and provides a soft, non-reflective surface. The metal rockers match the faceplate finish, creating a monochromatic appearance that pairs with industrial, minimalist and contemporary interiors. A built-in gasket behind the faceplate edge provides IP20 dust ingress protection. The switch requires a minimum 16mm back box depth and is certified to EN 60669-1.

    Specification
    Height 87.5 mm
    Width 87.5 mm
    Projection 4.3 mm
    Min. Mounting Box Depth 16mm
    Construction Premium grade steel
    Finish Matt Black
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Warranty 25
    Downloads

    Product Specification Sheet

    Product Manual

    Frequently Asked

    What does 2-way switching mean?

    2-way switching allows each gang to be controlled from two different switch locations. This is standard for staircases, hallways and rooms with two entrances, where you need to turn the same light on or off from either end. Each gang operates independently as a 2-way switch.

    What back box depth is required?

    A minimum 16mm back box depth is needed. This shallow requirement makes the switch suitable for dry-lining installations where deeper boxes cannot be accommodated. The screwless cover plate adds 4.3mm projection from the wall once fitted.

    Is the screwless plate removable for redecorating?

    Yes. The cover plate clips onto a separate metal sub-frame that is screwed to the back box. The cover can be removed for painting around the switch and re-clipped without disturbing the wiring.

    What other finishes are available in this range?

    Knightsbridge produces this 3-gang 2-way switch in polished chrome, brushed chrome, polished brass, antique brass, white and other finishes. Use the search function or filters at Niori to find other variants in stock.

    Shipping & Returns

    Free worldwide delivery

    Free worldwide delivery on all orders over £99. International orders for third-party brand products may be subject to an additional courier surcharge based on volumetric weight, particularly on larger lighting fixtures — if a surcharge applies, our team will email you with the amount before dispatch and you can proceed or cancel for a full refund. See full delivery terms.

    Returns

    30-day returns window from delivery. As all our products are electrical or lighting goods, returned items must be inspected and recertified by a qualified electrician before resale — the cost of this inspection (25–40% of the item value) is deducted from your refund. Customers pay return shipping. Made-to-order, special-order and clearance items cannot be returned. See full returns policy.