Free Delivery on all orders over £99*

1 Gang 2-Way 10-200W Intelligent Dimmer - Gunmetal Flat Plate

£1899
The RRP is the manufacturer's recommended retail price of the item.
60 In Stock - Ready to Ship
We are an Independent UK Company
Price match. Found it cheaper? Contact us
Trade Discount Available
Description

The Knightsbridge FP2191GM is a 1-gang 2-way intelligent dimmer rated for 10-200W loads (5-150W for LED lamps), housed in a gunmetal flat plate with a matching rotary dimmer knob. The dimmer supports both trailing-edge and leading-edge modes, pre-set to trailing-edge for LED compatibility. The rotary control combines push on/off with rotate-to-dim functionality, giving single-handed control over both switching and brightness.

Designed for 2-way switching circuits where the same lighting circuit is controlled from two locations, the dimmer fits a standard 25mm minimum back box depth. The flat plate projects just 2.5mm from the wall once installed, making it suitable for low-profile installations where a traditional domed switch would protrude too far. The front-mounted trimming and mode-switching controls allow adjustment without removing the faceplate from the wall.

The gunmetal finish is a dark grey-bronze metallic tone that sits between graphite and pewter, pairing with industrial, contemporary and monochrome interiors. The premium-grade steel construction includes overload and overheat protection, plus an inrush current limiter to handle the initial power draw when switching on LED lamps. The dimmer carries a Class I earth terminal and IP20 rating for dry indoor use.

For best performance, use with dimmable LED lamps of the same brand, wattage and model on a single circuit. Mixing different lamp types or wattages on the same dimmer can cause flickering, reduced dimming range or inconsistent behaviour.

Specification
Height 87.5 mm
Width 87.5 mm
Projection 2.5 mm
Min. Mounting Box Depth 25mm
Construction Premium grade steel
Finish Gunmetal
Class I
IP Rating IP20
Primary Voltage 230V 50Hz
Earth Terminal Yes
Terminal Screw
Warranty 2
Downloads

Product Specification Sheet

Frequently Asked

What's the difference between trailing-edge and leading-edge modes?

Trailing-edge mode is optimised for LED and low-voltage lamps, cutting the trailing part of the AC waveform to reduce dimming flicker and hum. Leading-edge mode suits traditional incandescent and halogen lamps. The dimmer is pre-set to trailing-edge but can be switched to leading-edge using the front-mounted control if needed.

Can this dimmer be used in a 1-way circuit?

Yes. The 2-way designation means it supports both 1-way and 2-way switching circuits. For a single switch controlling one lighting circuit, it functions as a standard 1-way dimmer.

What back box depth is required?

A 25mm minimum back box depth is needed. The flat plate adds just 2.5mm of projection from the wall once fitted, making the total installed depth approximately 27.5mm.

Why should I avoid mixing lamp types on the same circuit?

Different LED lamps have different driver circuits and dimming curves. Mixing brands, wattages or models on the same dimmer can cause some lamps to flicker, others to dim unevenly, or the dimmer to fail to reach full brightness or full dim. Best results come from using identical lamps throughout the circuit.

Shipping & Returns

Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

To arrange a return, call us on 020 8149 5199 or use our contact page.

See it lit, in person

Lighting looks different in a real room. Come and see our range at our showrooms in Birmingham, Hong Kong and Dubai, or talk to our design team wherever you are.

Niori lighting showroom trailer video with closeups of alabaster lighting

Why Niori

Over 20 years lighting homes worldwide

We are a specialist lighting and mirror retailer with showrooms in Birmingham, Hong Kong and Dubai, shipping to customers around the world. Our own design team is here to help, from first idea to final fitting.

Genuine products

An authorised stockist

Every product arrives brand new with the full manufacturer warranty. Found it cheaper elsewhere? Ask us about a price match.

Installation

Fits standard UK back boxes

Designed to fit standard UK back boxes for a straightforward swap of your existing fittings.

Ordering with us

Free delivery over £99

Free delivery on orders over £99, in the UK and worldwide. Easy returns within 14 days, subject to our returns policy. Full manufacturer warranty included.

You Might Also Like

Recommended For You

    Our Reviews

    From first click to final installation, our customers share how Niori lights up their spaces. Read their words and envision what’s possible for yours.

    Featured Projects

    Step into our portfolio and see how we transform homes, restaurants, and commercial spaces and more, worldwide. Click here for a closer look at our latest projects.

    Description

    The Knightsbridge FP2191GM is a 1-gang 2-way intelligent dimmer rated for 10-200W loads (5-150W for LED lamps), housed in a gunmetal flat plate with a matching rotary dimmer knob. The dimmer supports both trailing-edge and leading-edge modes, pre-set to trailing-edge for LED compatibility. The rotary control combines push on/off with rotate-to-dim functionality, giving single-handed control over both switching and brightness.

    Designed for 2-way switching circuits where the same lighting circuit is controlled from two locations, the dimmer fits a standard 25mm minimum back box depth. The flat plate projects just 2.5mm from the wall once installed, making it suitable for low-profile installations where a traditional domed switch would protrude too far. The front-mounted trimming and mode-switching controls allow adjustment without removing the faceplate from the wall.

    The gunmetal finish is a dark grey-bronze metallic tone that sits between graphite and pewter, pairing with industrial, contemporary and monochrome interiors. The premium-grade steel construction includes overload and overheat protection, plus an inrush current limiter to handle the initial power draw when switching on LED lamps. The dimmer carries a Class I earth terminal and IP20 rating for dry indoor use.

    For best performance, use with dimmable LED lamps of the same brand, wattage and model on a single circuit. Mixing different lamp types or wattages on the same dimmer can cause flickering, reduced dimming range or inconsistent behaviour.

    Specification
    Height 87.5 mm
    Width 87.5 mm
    Projection 2.5 mm
    Min. Mounting Box Depth 25mm
    Construction Premium grade steel
    Finish Gunmetal
    Class I
    IP Rating IP20
    Primary Voltage 230V 50Hz
    Earth Terminal Yes
    Terminal Screw
    Warranty 2
    Downloads

    Product Specification Sheet

    Frequently Asked

    What's the difference between trailing-edge and leading-edge modes?

    Trailing-edge mode is optimised for LED and low-voltage lamps, cutting the trailing part of the AC waveform to reduce dimming flicker and hum. Leading-edge mode suits traditional incandescent and halogen lamps. The dimmer is pre-set to trailing-edge but can be switched to leading-edge using the front-mounted control if needed.

    Can this dimmer be used in a 1-way circuit?

    Yes. The 2-way designation means it supports both 1-way and 2-way switching circuits. For a single switch controlling one lighting circuit, it functions as a standard 1-way dimmer.

    What back box depth is required?

    A 25mm minimum back box depth is needed. The flat plate adds just 2.5mm of projection from the wall once fitted, making the total installed depth approximately 27.5mm.

    Why should I avoid mixing lamp types on the same circuit?

    Different LED lamps have different driver circuits and dimming curves. Mixing brands, wattages or models on the same dimmer can cause some lamps to flicker, others to dim unevenly, or the dimmer to fail to reach full brightness or full dim. Best results come from using identical lamps throughout the circuit.

    Shipping & Returns

    Delivery UK delivery is £14.99, and delivery is free on all orders of £99 or more, in the UK and internationally.

    Returns If you change your mind, you have 14 days from delivery to tell us, and a further 14 days to send the goods back. Return postage for a change-of-mind return is paid by you. Change-of-mind returns are subject to an inspection and handling deduction. See our full returns policy.

    To arrange a return, call us on 020 8149 5199 or use our contact page.