Description
The Mercury DC1515EU is a replacement power supply that gives you 15Vac at 1500mA output. It's built to European electrical standards, so it drops in as a like for like swap for adapters that have been damaged, lost, or simply worn out over time. We stock these across a range of voltage and current ratings, and this one covers devices that call for a 15V AC supply drawing up to 1.5 amps.
Connection is handled by a standard DC jack measuring 5.5 x 2.1mm, which is one of the most common barrel sizes you'll find on small electronics and lighting kit. Before ordering, it's worth checking the output printed on your old adapter, or the label on the device itself, to confirm both the voltage and the polarity match. This model outputs AC rather than DC, so it isn't a substitute for a DC power supply of the same voltage.
The unit fits an EU mains socket (mains adapter in UK terms, wall wart in US terms). It's a practical choice when the original supply has failed and you'd rather replace just the adapter than the whole device. As with any power supply, match the ratings carefully to avoid under or over powering your equipment, and if you're at all unsure of the correct specification, check the manufacturer's documentation for your device first.
Specification
| Connector |
DC jack 5.5 x 2.1mm |
| Type |
Fixed Voltage |
| Model |
DC1515EU |
Frequently Asked
What are the output ratings?
This power supply outputs 15Vac at 1500mA (1.5A). Check that both the voltage and current match what your device needs before fitting.
What connector does it use?
It has a standard DC jack measuring 5.5 x 2.1mm, a common barrel size on many small electronic devices.
Is this an AC or DC output?
It provides an AC output (Vac), not DC. Make sure your device requires an AC supply, as this won't replace a DC adapter of the same voltage.
Will it fit a UK socket?
No, this is the EU version with an EU mains plug. You'd need an adapter for a UK socket, or check our UK plug versions.
How do I know if it's right for my device?
Check the label on your original adapter or the device itself for the voltage, current, and connector size, then match those to this supply.