Description
We built the Citronic RACK:6U to keep your 19" audio equipment safe on the road. It takes standard rack-mount gear such as amplifiers, mixers and processors, and gives you 6U of mounting space to work with. The case is made from 9mm vinyl laminated plywood, with washers fitted on all the rivets to strengthen the joints and stop the wood from splitting over time.
Both the front and rear lids are removable, so you can get to your equipment from either side and cable it up while the gear stays mounted. Heavy duty handles make the case easier to lift and carry, and protective corner pieces (sometimes called corner caps) take the knocks that come with regular transport. It is a practical bit of kit for anyone moving audio gear between venues or setting up temporary rigs.
This is the 6U version, but the same range runs in 2, 3, 4, 6, 8, 10, 12 and 16U sizes, so you can pick the depth that suits your setup. If you run a mobile PA, a DJ rig or a hire stock, a flightcase like this protects the equipment you have spent good money on. Choose the U count based on how much gear you need to mount and how you plan to lay it out.
Specification
| Diameter |
9 |
| Type |
Full Flight Cases |
| Model |
RACK:6U |
Frequently Asked
How much equipment fits in the RACK:6U?
It gives you 6U of standard 19" rack space, so you can mount up to six 1U units or a mix of taller components that add up to 6U.
Can I access the equipment from both sides?
Yes. Both the front and rear lids are removable, which lets you reach the gear and manage cabling from either end of the case.
What is the case made from?
It is built from 9mm vinyl laminated plywood, with washers on all the rivets to strengthen the wood and stop it splitting.
Are other sizes available?
Yes. The same range comes in 2, 3, 4, 6, 8, 10, 12 and 16U versions, so you can match the size to your equipment.
Is it suitable for regular transport?
It is designed for moving equipment safely, with heavy duty handles and protective corner pieces to handle the knocks of the road.