Description
This Citronic audio lead connects a 6.3mm mono jack plug to two RCA phono plugs, giving you a straightforward link between mixers, amplifiers and other audio gear. It measures 1.5m, which suits most desktop and rack setups without leaving excess cable to manage. The RCA connectors are sometimes called phono plugs in the UK, so you may see both terms used for the same fitting.
The cable itself is a twinned design with a 5mm diameter and pure copper conductors, each made up of 12 strands at 0.1mm. Cotton reinforcement runs through the build to help the lead hold up to repeated use, and the shielding works to keep interference down so your signal stays clean. The rubberised outer jacket is soft to handle and resists tangling when you coil it away.
The connectors are die-cast for a solid feel, and the joints are machine-soldered for consistent contact across every unit. This is a practical lead for anyone running a mixer output into RCA inputs, or the other way round, whether you are working in a home studio, a DJ booth or a small PA rig. It gives you reliable sound without any fuss, and the length and fittings cover a wide range of common connection jobs.
Specification
| Length |
1.5m |
| Cable : diameter |
Twin 5mmØ (5 x 10mm) |
| Conductors |
2 x 12 strand, 0.1mmØ pure copper |
| Connectors |
6.3mm mono jack plug, 2 x RCA phono |
Frequently Asked
What does this lead connect?
It links a single 6.3mm mono jack plug to two RCA phono plugs, so you can join mixers, amplifiers and similar audio equipment.
How long is the cable?
The lead is 1.5m long, which suits most desktop, rack and booth setups.
Are RCA and phono plugs the same thing?
Yes. RCA is the common US term and phono is often used in the UK, but they refer to the same connector.
What are the conductors made from?
Each conductor uses 12 strands of 0.1mm pure copper, with cotton reinforcement in the cable build.
Is the cable shielded?
Yes, it is shielded to help reduce interference and keep the audio signal clean.
Are the connections soldered?
The connections are machine-soldered for consistent contact, and the plugs are die-cast.