Description
This AV:Link lead connects two RCA phono plugs to two RCA phono plugs, giving you a straightforward stereo link between your audio gear. RCA connectors are also known as phono plugs, so whether your equipment labels them one way or the other, this cable fits the same standard sockets. It runs to 5.0 metres, which gives you room to route the cable neatly between components without pulling anything tight.
The cable uses a 2.6mm diameter screened twin construction, with each conductor made up of ten 0.10mm cores. The screening helps keep interference out of the signal, which matters when you are running audio over longer distances. The plugs are colour coded, so you can match left and right channels correctly and keep your stereo setup the right way round. It works for connecting amplifiers, CD players, turntables with a phono stage, mixers and similar equipment that uses standard RCA outputs and inputs.
We supply this lead in a sealed retail bag, so it arrives clean and ready to use. It is a practical choice for both home setups and general audio work where you need a reliable stereo connection at a set length. If you are replacing an older cable or extending a run, the 5.0m version gives you flexibility without leaving too much slack to manage.
Specification
| Weight |
0.17KG |
| Cable : length |
5.0m |
| Cable : diameter |
2.6mmØ x 2 |
| Core diameter |
10 x 0.10mm |
Frequently Asked
What does this cable connect?
It connects two RCA phono plugs to two RCA phono plugs, giving a stereo audio link between two pieces of equipment.
Are RCA and phono plugs the same thing?
Yes. RCA connectors are also called phono plugs. They refer to the same standard connector used for stereo audio.
How long is the cable?
This version is 5.0 metres long, which suits most home and general audio setups.
Is the cable screened?
Yes. It uses a 2.6mm diameter screened twin construction to help reduce interference on the signal.
How do I match the channels correctly?
The plugs are colour coded, so you can match the left and right channels at both ends for correct stereo connection.
What can I use this lead with?
It works with amplifiers, CD players, mixers and other equipment fitted with standard RCA stereo outputs and inputs.