Amarilli 10 Light Chandelier - Bronze With Gold Patina

The Amarilli is a 900mm diameter chandelier with ten E14 candle fittings arranged across two tiers of hand-forged bronze scrollwork. The frame carries antiqued metal oak leaves finished in a gold patina that contrasts with the darker bronze base metalwork, and each arm terminates in a cut glass sconce that holds the candle tube. Clear faceted glass drops hang beneath the lower tier of arms and from the central stem, catching and refracting light from the ten bulbs.

Designed for dining rooms with ceiling heights of 2.7m or above, the Amarilli can also centre a double-height entrance hall or stairwell where the scrollwork and leaf detail remain visible from multiple viewing angles. The drop is adjustable on installation from a minimum of 690mm to a maximum of 1960mm using the supplied chain, allowing the chandelier to be set 750-850mm above a dining table or hung higher in taller rooms. The 900mm diameter suits tables up to 2400mm in length or floor areas of 20-30m².

Each piece is hand-forged by Elstead's metalworkers, so the exact curvature of the scrolls and the positioning of individual oak leaves varies slightly between chandeliers. The bronze finish shows tonal variation across the metalwork where the gold patina has been hand-applied and antiqued, giving the piece a depth that flat powder-coated finishes cannot replicate. The ten E14 fittings take standard small Edison screw candle bulbs up to 60W each (sold separately), with most installations using 4-6W LED candle bulbs in warm white to balance light output with the traditional aesthetic.

What bulbs does the Amarilli take?

The chandelier has ten E14 (small Edison screw) fittings, each rated for up to 60W. Bulbs are sold separately. Most users choose 4-6W LED candle bulbs in warm white (2700K-3000K) to replicate traditional candle light without the heat or running cost of halogen.

What ceiling height is needed?

The adjustable drop ranges from 690mm to 1960mm. For a dining table installation, the chandelier typically hangs 750-850mm above the table surface, which requires a ceiling height of at least 2.7m. Higher ceilings up to 3.5m can accommodate a longer drop while maintaining proportions.

Is the gold patina finish applied by hand?

Yes. Each Amarilli chandelier is hand-forged and the gold patina is hand-applied to the oak leaf details and then antiqued, creating tonal variation across the metalwork. No two pieces are identical.

What room size does this suit?

The 900mm diameter works well over dining tables up to 2400mm in length, or as a central feature in rooms with floor areas of 20-30m². Smaller rooms may find the chandelier visually dominant; larger spaces above 40m² may benefit from pairing it with additional wall lights or table lamps.