Description
The Adastra KV6 is a 6.5" two-way passive ceiling speaker built for clear music playback in homes, offices and hospitality spaces. It uses a heavy duty glass-aramid cone paired with a coaxial dome tweeter, mounted to a wave guide baffle that helps spread sound evenly across a 120° dispersion angle. A full two-way passive crossover network splits the signal between the drivers, keeping the frequency balance accurate and efficient across the range.
Construction is a braced ABS basket with an integral wave guide, and the speaker sits behind a magnetic low profile steel grille. The grille is frameless and clips into place magnetically, so it sits flush against the ceiling for a clean finish. Rated at 60W and 8 Ohms, the KV6 works with standard low impedance amplifiers, and the coaxial layout means the high frequency (HF) driver, a 25mm ASV diaphragm dome tweeter, fires from the centre of the main cone for consistent output wherever you stand.
The KV6 is supplied individually, so you can buy the exact number you need for your layout rather than in fixed pairs. It suits background and foreground music where you want tidy, unobtrusive speakers set into the ceiling. British and US buyers will find this listed as either a ceiling speaker or an in-ceiling speaker; both terms describe the same product. With its powder coated steel grille and ABS body, it is a solid choice for installers and home users wanting good sound quality from a fixed ceiling fit.
Specification
| Weight |
1.31KG |
| Dimensions |
94mm x 232mmØ |
| Mounting depth |
95mm |
| Cutout |
205mmØ |
| Max. SPL |
103dB |
| SPL @ 1W/1m |
90dB |
| Frequency response |
50Hz - 20kHz |
| Power handling : rms |
30W |
| Magnet weight |
0.35KG |
| Main driver |
165mmØ (6.5") glass-aramid diaphragm |
| Power handling : max |
60W |
| Construction |
ABS basket & powder coated steel grille |
| Impedance |
8 Ohm |
| Dispersion angle |
120° |
| HF driver |
25mmØ (1") ASV diaphragm |
Frequently Asked
Are the Adastra KV6 speakers sold as a pair?
No, each KV6 is supplied individually. Order the quantity you need for your room or install.
What amplifier do I need for the KV6?
The KV6 is an 8 Ohm passive speaker rated at 60W, so it works with standard low impedance stereo or multi-room amplifiers.
How is the grille fitted?
The grille is a magnetic low profile steel design that clips into place without a visible frame, sitting flush against the ceiling.
What size cutout does the KV6 need?
It is a 6.5" ceiling speaker. Check the supplied template or manual for the exact cutout diameter before fitting.
Does the KV6 have a tweeter?
Yes, it uses a coaxial 25mm (1") ASV diaphragm dome tweeter set within the main cone for even sound dispersion.
What is the dispersion angle?
The wave guide baffle gives a 120° dispersion angle, helping spread sound across a wide listening area.