Finelli LED Picture Light 12.1W 3000K - Bronze & White

The Finelli is a 55cm LED picture light with an integrated 12.1W 3000K LED module housed in a bronze metal arm that extends from a rectangular 11.5cm wall plate. The LED runs the length of the arm behind a white polycarbonate diffuser, casting warm white light evenly across the surface of a painting, photograph or mirror mounted below. The arm pivots on a swivel hinge at the wall plate, allowing the angle of illumination to be adjusted between near-vertical and around 45 degrees from the wall.

Designed for residential picture lighting above artwork, mirrors and wall-mounted photographs, the Finelli also suits commercial gallery installations where directional accent lighting is needed without ceiling-mounted spotlights. The 55cm arm length covers frames up to approximately 100-120cm wide, depending on the mounted height above the frame. The fixture mounts directly to the wall on a standard electrical back box or surface-mounted wiring, with the cable entering through the rear of the rectangular wall plate. The IP20 rating limits use to dry indoor locations.

The bronze finish on the metal arm and wall plate provides a warm metallic accent that pairs well with traditional gilt frames, brass-finished mirrors and warm-toned classical interiors. The white polycarbonate diffuser sits flush within the bronze housing, creating a clean edge where the light source meets the metal. The 3000K colour temperature produces a warm white light that does not shift the colour perception of oil paintings or photographic prints, making it a practical choice for both decorative and archival lighting applications.

The integrated LED eliminates the need for bulb replacement and draws 12.1W on 220-240V mains, which is equivalent to around 100W of incandescent output in terms of lumens while consuming significantly less energy. The swivel mechanism allows the light to be re-angled after installation without tools, so the same fitting can be repositioned when artwork is changed or when lighting needs adjustment after viewing the piece under different daylight conditions.

Product Manual

What size artwork does the 55cm arm cover?

The 55cm arm length typically illuminates frames up to 100-120cm wide when mounted 10-15cm above the top edge of the frame. Narrower frames receive more concentrated light; wider frames may need two picture lights spaced across the width.

Can the angle be adjusted after installation?

Yes. The arm pivots on a swivel hinge at the wall plate and can be repositioned by hand without tools. The angle can be set anywhere between near-vertical and approximately 45 degrees from the wall to suit the height and size of the artwork below.

Does the LED need replacing?

No. The 12.1W LED module is integrated into the fixture and is not user-replaceable. LED lifespan is typically rated at 25,000-50,000 hours, which equates to many years of normal domestic use before any degradation in output becomes noticeable.

What colour temperature is the light?

The LED produces 3000K warm white light, which is a neutral warm tone that does not shift the colour perception of oil paintings, watercolours or photographic prints. This makes it suitable for both decorative and archival lighting applications.