Vesper 3 Light Bar Pendant - White

The Vesper is a 3 light bar pendant with three white conical glass shades suspended from an 820mm white metal bar. Each shade is hand-blown, then etched and sandblasted to create a matte textured surface that diffuses light evenly across the cone. The three E14 bulb fittings hang on individual suspension cables, allowing each shade to be set at a different height if needed.

Designed for kitchen islands, dining tables and open-plan living areas, the Vesper works best when installed along the length of a table or worktop where its 820mm bar can spread light across the surface below. The adjustable cables let each pendant sit at the height that suits your ceiling and furniture layout — typically 700-800mm above a dining table or 600-750mm above a kitchen island. The IP20 rating confirms the fitting is suitable for dry indoor use only.

The white-on-white finish (white glass, white metal bar, white cable sleeves) creates a monochrome look that pairs cleanly with Scandinavian, minimalist and contemporary interiors. The conical shape directs most of the light downwards while the sandblasted glass softens the bulb outline, reducing glare when seated at eye level with the shades. Each cone measures 200mm in diameter at the base and 260mm in height, giving the fitting a visible presence without overwhelming a typical 4-6 person dining table.

What bulbs does it take?

The Vesper takes three E14 small Edison screw bulbs, sold separately. Most users pair it with 4-6W warm white LED candle bulbs at 2700K-3000K for ambient dining or kitchen lighting.

Is it dimmable?

Yes, the fitting is dimmable. You will need dimmable E14 bulbs and a compatible dimmer switch on the circuit. Dimmer compatibility varies by bulb brand — check the bulb packaging before pairing with a dimmer.

Can the cable heights be adjusted individually?

Yes. Each of the three pendants hangs on its own suspension cable, so they can be set at different heights during installation. This allows the shades to be staggered or aligned at the same level depending on your preference.

What table size does it suit?

The 820mm bar length works well above dining tables between 1400-1800mm long or kitchen islands of similar length. For shorter tables the bar may overhang; for longer tables (2000mm+) consider a 5 or 7 light version if available, or position the Vesper at one end rather than centred.