Pure Dimmable LED Magnetic Track Pendant 12W 4000K - Black

The Pure is a 400mm cylindrical pendant light designed for Ideal Lux magnetic track systems, housing an integrated 12W LED module that delivers 4000K neutral white light. The pendant attaches magnetically to compatible track rails without tools, allowing it to be repositioned along the track or removed entirely for reconfigurations. The black extruded aluminium cylinder measures 40mm in diameter and projects 190mm from the track rail when installed.

Designed for kitchens, home offices, retail and hospitality applications where track lighting provides flexibility, the Pure works as task lighting over worktops and desks, or as accent lighting to highlight specific areas or objects. The magnetic connection means the pendant can be slid along the track to adjust coverage as room layouts change. The 4000K colour temperature falls in the neutral white range, providing clear illumination without the warmth of 3000K or the clinical tone of 5000K-6000K commercial lighting.

The dimmable LED module allows output to be reduced from full brightness down to lower ambient levels using compatible dimming systems. The black aluminium finish provides a matt surface that minimises reflections and pairs with both contemporary and industrial interiors. The cylindrical form directs light downward in a focused beam rather than diffusing it in all directions, making the Pure suitable where concentrated light is needed rather than general ambient fill.

The IP20 rating confirms the Pure is designed for dry indoor locations only and should not be installed in bathrooms, outdoor areas or other locations where moisture or water spray is present. Ideal Lux provides a 5-year warranty on this fitting.

Does this work with any track system?

No. The Pure is designed for Ideal Lux magnetic track systems only. It will not attach to standard three-circuit track rails or other manufacturers' magnetic tracks without compatible adapters.

Is the LED replaceable?

The LED module is integrated into the pendant body. When the LED reaches end of life, the entire pendant is replaced rather than just the lamp.

What dimming system does it need?

The Pure requires a compatible LED dimmer installed at the mains supply to the track system. Not all LED dimmers work with all LED modules — check compatibility with your dimmer manufacturer before installation.

Can it be used in a bathroom?

No. The IP20 rating means the Pure is suitable for dry indoor locations only. It does not carry the IP44 or IP65 rating required for bathroom zones or outdoor use.