Prismatic LED Driver Box 330mm - White Metal

The Prismatic is a 330mm white metal driver box designed to house LED drivers in lighting installations where the driver cannot be concealed within the ceiling void or fitting itself. The box measures 330mm long × 80mm deep, providing enough internal volume for one or more LED drivers depending on their individual sizes, and mounts onto a wall or ceiling surface to keep the drivers accessible for maintenance while protecting them from dust and casual contact.

Used in track lighting systems, modular LED strips, architectural linear lighting and retrofit installations where remote drivers are needed, the Prismatic mounts in utility areas, above false ceilings with service hatches, in plant rooms, or on walls behind furniture where access is needed but the driver itself doesn't need to be visible. The white powder-coated finish blends with white ceilings and walls in commercial, retail and residential settings. The metal construction provides earthing continuity for the driver enclosure and physical protection against accidental impacts during maintenance work.

The 330mm length suits drivers for lighting runs up to approximately 10-15m of LED strip or multiple track heads, though the exact driver count depends on the wattage and physical dimensions of the specific drivers being installed. The 80mm projection from the mounting surface is shallow enough to fit in most ceiling voids or behind service panels without requiring significant clearance. Knockouts or cable entry points allow mains and low-voltage cables to enter and exit the box cleanly, and the hinged or removable cover (configuration varies by batch) allows the box to be opened for driver replacement without removing it from the wall.

What size drivers does it fit?

The internal volume is 330mm × 80mm. Most LED drivers for track lighting and strip systems are 200-300mm long and 40-60mm wide, so the box typically accommodates one large driver or two to three smaller drivers depending on their specific dimensions. Check your driver's physical size before ordering.

How is it mounted?

The box mounts to a wall or ceiling surface using screws through the back panel. Knockouts or pre-drilled cable entry points allow mains and low-voltage cables to enter and exit. The cover is hinged or removable for access to the drivers inside.

Is it suitable for outdoor use?

The Prismatic is a metal box with a powder-coated finish but does not carry an IP rating. It's designed for indoor use or within covered outdoor areas where the box itself is protected from direct rain and moisture exposure.

Can it be painted?

Yes. The white powder-coated metal surface can be painted with standard metal primer and paint if you need to match a specific interior colour. Clean and lightly sand the surface before priming for best adhesion.