Description
The Ottilia is a 32cm semi-flush crystal ceiling light with a gold metal frame, three E14 bulb fittings, and cascading faceted crystal elements arranged in tiers around the frame. A decorative perforated ring sits at the top of the frame beneath a polished gold canopy, while a single cut crystal droplet hangs from the centre finial beneath the main body of the fitting.
Designed for rooms with ceiling heights between 2.3m and 2.7m where a full chandelier would hang too low, the Ottilia sits close to the ceiling with a 21cm drop from canopy to the bottom of the central droplet. This semi-flush configuration suits bedrooms, hallways, smaller dining rooms, and dressing rooms where decorative lighting is needed without losing headroom. The three E14 bulbs (sold separately) provide ambient light that reflects and refracts through the crystal elements, casting prismatic highlights across walls and ceilings when lit.
The gold finish on the metal frame has a polished sheen that complements warm brass hardware, traditional interiors, and warmer neutral colour schemes. The crystal elements include larger faceted pieces on the upper and middle tiers, with smaller crystals densely packed on the lower section to create weight and sparkle at the base of the fitting. Each crystal is individually mounted on metal pins, allowing light to pass through and refract at different angles depending on bulb position.
Specification
| Height |
21cm |
| Diameter |
32cm |
| Max Height |
23.5cm |
| Min Height |
23.5cm |
| Finish |
Gold |
| Construction |
Metal |
| IP Rating |
IP20 |
| Voltage |
AC 220-240 |
| Bulb Base |
E14 |
| Wattage |
60 |
| Warranty |
2 Year Guarantee |
Downloads
Product Manual
Frequently Asked
What ceiling height does this suit?
The Ottilia is designed for rooms with ceiling heights between 2.3m and 2.7m. The 21cm drop from canopy to the bottom of the central crystal droplet keeps the fitting close to the ceiling, making it suitable for bedrooms, hallways and dining rooms where a full pendant chandelier would hang too low.
What bulbs does it take?
The fitting takes three E14 small Edison screw bulbs, up to 60W each. Bulbs are sold separately. Most users pair this with warm-white LED candle bulbs at 2700K-3000K to complement the gold frame and enhance the crystal refraction.
Is it suitable for bathrooms?
No. The IP20 rating means the fitting is for dry indoor use only and is not protected against moisture. It should not be installed in bathrooms, en-suites or other areas with high humidity.
How is the crystal cleaned?
Wipe individual crystals gently with a dry microfibre cloth. For more thorough cleaning, switch off at the mains and allow the fitting to cool fully, then remove individual crystals from their pins and clean with a solution of distilled water and a drop of washing-up liquid. Rinse with distilled water, dry fully and reattach.